ESAB Tigrod 316L stainless steel TIG rods are intended for welding austenitic alloys containing 18% Cr - 8% Ni and 18% Cr - 10% Ni - 3% Mo. Their low carbon content makes them suitable for applications where there is a risk of intergranular corrosion, and they offer resistance to corrosion in acidic and chlorinated environments. They are used in the chemical and food industries, shipbuilding, and architectural construction.
The weld metal has a yield strength of 470 MPa, a tensile strength of 600 MPa, and an elongation of 32%. Charpy V-Notch impact strength is 175 J at 20 °C, 130 J at -60 °C, 120 J at -110 °C, and 75 J at -196 °C.
- Type: TIG welding rods
- Material: Stainless steel
- Diameter: 1.6 mm
- Length: 1,000 mm
- Quantity: 1
- Welding alloys: 18% Cr - 8% Ni and 18% Cr - 10% Ni - 3% Mo
- Weld metal yield strength: 470 MPa
- Weld metal tensile strength: 600 MPa
- Weld metal elongation: 32%
- Charpy V-Notch impact strength at 20 °C: 175 J
- Charpy V-Notch impact strength at -60 °C: 130 J
- Charpy V-Notch impact strength at -110 °C: 120 J
- Charpy V-Notch impact strength at -196 °C: 75 J
- Rod chemical composition: C 0.01%, Mn 1.7%, Si 0.4%, S 0.010%, P 0.015%, Ni 12.0%, Cr 18.2%, Mo 2.6%, Cu 0.10%, N 0.04%, FN (WRC-92) 7
- Weld metal chemical composition: C 0.01%, Mn 1.8%, Si 0.4%, S 0.01%, P 0.02%, Ni 12%, Cr 19%, Mo 2.6%, Cu 0.1%, N 0.05%, FN (WRC-92) 7
Specifications
- Type
- Electrodes
- Pieces
- 1 pcs
Dimensions
- Diameter
- 1.6 mm
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.