Skroutz.mt

Tig Rods Stainless Steel Ok Tigrod 309l Diameter 2.4x1000mm A5.9 Er 309l
Welding Consumables

Tig Rods Stainless Steel Ok Tigrod 309l Diameter 2.4x1000mm A5.9 Er 309l

The ESAB OK Tigrod 309L rods offer good corrosion resistance and are used for welding steels of 24% Cr and 13% Ni types. The alloy is also used for welding protective layers on CMn steels and for...

The ESAB OK Tigrod 309L rods offer good corrosion resistance and are used for welding steels of 24% Cr and 13% Ni types. The alloy is also used for welding protective layers on CMn steels and for joining different types of joints. When used for welding protective coatings or dissimilar materials, it is essential to monitor the dissolution of the weld metal....

See Description & Specifications See Description & Specifications

Learn more about invoicing
Review the product
Product report

Description & Specifications

The ESAB OK Tigrod 309L rods offer good corrosion resistance and are used for welding steels of 24% Cr and 13% Ni types. The alloy is also used for welding protective layers on CMn steels and for joining different types of joints. When used for welding protective coatings or dissimilar materials, it is essential to monitor the dissolution of the weld metal. The OK Tigrod 309L provides good general corrosion resistance, while when used for welding different materials, corrosion resistance becomes a secondary consideration.

  • Standards: EN ISO 14343-A : W 23 12 L, SFA/AWS A5.9 : ER309L
  • Designations: CE : EN 13479, CWB : ER309L, UKCA : EN 13479, VdTÜV : 10021
  • Alloy Type: Solid wire (containing approximately 10% ferrite)

Filler Metal Properties:

  • Yield Strength: 430 MPa (62 ksi)
  • Tensile Strength: 590 MPa (86 ksi)
  • Elongation: 32%

Charpy V-Notch Properties:

  • At 20°C (68°F): 160 J (118 ft-lb)
  • At -60°C (-76°F): 130 J (96 ft-lb)
  • At -110°C (-166°F): 90 J (66 ft-lb)

Alloy Composition (in %):

  • C: 0.015
  • Mn: 1.7
  • Si: 0.4
  • S: 0.015
  • P: 0.020
  • Ni: 13.0
  • Cr: 24.0
  • Mo: 0.1
  • Cu: 0.1
  • N: 0.08
  • FN: 12

Rod Composition (in %):

  • C: 0.02
  • Mn: 1.8
  • Si: 0.4
  • S: 0.010
  • P: 0.015
  • Ni: 13.4
  • Cr: 23.2
  • Mo: 0.10
  • Cu: 0.1
  • N: 0.05
  • FN: 10

Manufacturer

Manufacturer Details

Warnings & Safety Information

Specifications

Type
Electrodes
Pieces
1 pcs

Dimensions

Diameter
2.4 mm

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

30,54 €
14,00 €   shipping cost