Skroutz.mt

Maverick Waste Water / Sewage Pump 0.4hp KR-MAV-MV300-300
Submersible Water Pumps

Maverick Waste Water / Sewage Pump 0.4hp KR-MAV-MV300-300

Key features:

  • Lifting of wastewater up to 9.5m
  • Maximum flow rate 150 lt/min
  • Silent operation 45 dB
  • Powerful 300 Watt motor

With the advanced lifting device Maverick MV 300, you can set up your kitchen or laundry room anywhere in the basement you wish.

See full description

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
  • See all
This product is temporarily unavailable at Skroutz Last updated: about 4 hours ago
Review the product
Product report

Description

Description

At a glance

  • Wastewater lifting up to 9.5m: An ideal choice for easy drainage of areas located below the level of the main sewage network.
  • Maximum flow rate 150 lt/min: Ensures fast and efficient water evacuation from multiple household appliances simultaneously.
  • Silent operation 45 dB: Extremely low noise levels that cause no disturbance during daily use in the home.
  • Powerful 300 Watt motor: Provides stable and reliable power for uninterrupted system operation under any conditions.

Installation Without Limitations

Do you want to create a modern kitchen or a practical laundry room in the basement but the drainage system is holding you back? With the Maverick MV 300, you can forget about heavy and costly construction work. It allows you to install your sink or appliances anywhere, as it pumps wastewater up to a height of 9.5 meters, bypassing any structural obstacle in your space.

Ultimate Compatibility & Power

You connect the Maverick MV 300 to your sink, dishwasher, or washing machine and enjoy uninterrupted flow. Thanks to its powerful 300W motor, it achieves an impressive output of up to 150 liters per minute. This way, it responds instantly even when all your household appliances are operating simultaneously, draining water quickly and safely.

Technical Specifications

  • Type: Sewage lifting device
  • Power: 300 W
  • Maximum Flow Rate (Qmax): 150 lt/min
  • Maximum Head (Hmax): 9.5 m
  • Noise Level: 45 dB
  • Use: Kitchen / areas below the sewage level (sink, dishwasher, washing machine)

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Waste Water / Sewage

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Horsepower
0.4 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
300 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Output
9 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

At a glance

  • Wastewater lifting up to 9.5m: An ideal choice for easy drainage of areas located below the level of the main sewage network.
  • Maximum flow rate 150 lt/min: Ensures fast and efficient water evacuation from multiple household appliances simultaneously.
  • Silent operation 45 dB: Extremely low noise levels that cause no disturbance during daily use in the home.
  • Powerful 300 Watt motor: Provides stable and reliable power for uninterrupted system operation under any conditions.

Installation Without Limitations

Do you want to create a modern kitchen or a practical laundry room in the basement but the drainage system is holding you back? With the Maverick MV 300, you can forget about heavy and costly construction work. It allows you to install your sink or appliances anywhere, as it pumps wastewater up to a height of 9.5 meters, bypassing any structural obstacle in your space.

Ultimate Compatibility & Power

You connect the Maverick MV 300 to your sink, dishwasher, or washing machine and enjoy uninterrupted flow. Thanks to its powerful 300W motor, it achieves an impressive output of up to 150 liters per minute. This way, it responds instantly even when all your household appliances are operating simultaneously, draining water quickly and safely.

Technical Specifications

  • Type: Sewage lifting device
  • Power: 300 W
  • Maximum Flow Rate (Qmax): 150 lt/min
  • Maximum Head (Hmax): 9.5 m
  • Noise Level: 45 dB
  • Use: Kitchen / areas below the sewage level (sink, dishwasher, washing machine)

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Waste Water / Sewage

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Horsepower
0.4 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
300 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Output
9 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.