Skroutz.mt

Hyundai Pool Hydromassage Pump Single-Phase with Power 1.5hp and Maximum Water Supply 285 lt/h
Pool Water Pumps

Hyundai Pool Hydromassage Pump Single-Phase with Power 1.5hp and Maximum Water Supply 285 lt/h

Electric pump LEPONO LSPA 1100 with performance switch, suitable for whirlpools, hydrotherapy, and spas. It is made of high-quality corrosion-resistant plastic material, suitable for liquid...

Electric pump LEPONO LSPA 1100 with performance switch, suitable for whirlpools, hydrotherapy, and spas. It is made of high-quality corrosion-resistant plastic material, suitable for liquid circulation in a whirlpool system.

  • Power: 1100 Watt - 1.5Hp
  • Maximum water flow: 285 lt/min
  • Maximum pumping height: 11 m
  • Outlet diameter: Φ40 (1 1/2'')
  • Maximum operating...
See full description See full description

  • Item

    Hydromassage

    Pump that circulates the water in the spa or jacuzzi system, sending it under pressure to the jets (special nozzles placed on the walls or the bottom of the pool) to create the hydromassage effect.

  • Power

    Indicates how much power the motor has to move water in the pool. The greater the resistance in the pool circuit (pipes, filters, elevation), the more the water flow that the pump can provide is reduced.
  • Pool Size Standard Domestic (50 to 90 m³)

  • Power Supply

    Single-Phase

    Operates with standard household electricity (230V). It is suitable for residential pools.

  • Flow rate (max)

    Shows how many liters of water the pump can deliver in 1 hour.

  • Manometric Head (Max)

    Indicates how "high" the pump can push the water, measured in meters. For example, if it says "max head 15 m," it means that the pump can theoretically raise the water up to a height of 15 meters.

  • Connection Nozzle

    Indicates the diameter of the pipe that can be connected to the pump.

    • The 32 mm & 38 mm sizes are usually used for small, flexible pipes (above-ground or inflatable pools).
    • The 50 mm & 63 mm sizes are for rigid PVC pipes (classic domestic or built-in pools).

    Tip: Check the diameter of your existing pipes before making a selection.
  • See all
Review the product
Product report

Description

Description

Electric pump LEPONO LSPA 1100 with performance switch, suitable for whirlpools, hydrotherapy, and spas. It is made of high-quality corrosion-resistant plastic material, suitable for liquid circulation in a whirlpool system.

  • Power: 1100 Watt - 1.5Hp
  • Maximum water flow: 285 lt/min
  • Maximum pumping height: 11 m
  • Outlet diameter: Φ40 (1 1/2'')
  • Maximum operating pressure: 2.5bar
  • Liquid temperature: up to +60°C
  • Ambient temperature: 40 °C

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Main Specifications

Type
Hydromassage

Type

Hydromassage

Pump that circulates the water in the spa or jacuzzi system, sending it under pressure to the jets (special nozzles placed on the walls or the bottom of the pool) to create the hydromassage effect.
Power (hp)
1.5 hp

Power (hp)

Indicates how much power the motor has to move water in the pool. The greater the resistance in the pool circuit (pipes, filters, elevation), the more the water flow that the pump can provide is reduced.
Power (Watt)
1100 W
Power Source
Single-Phase

Power Source

Single-Phase

Operates with standard household electricity (230V). It is suitable for residential pools.
Motor Type
Constant Speed

Motor Type

Constant Speed

The classic and most economical option. It always operates at 100% of its power, providing stable and reliable water circulation, but with higher electricity consumption and noise.
Suitable for Saltwater
No

Suitable for Saltwater

Necessary if your pool uses a salt chlorinator. These pumps feature reinforced materials with high resistance to corrosion from saltwater.
Pool Size
Standard Domestic (50 to 90 m³)
Filter Included
No

Performance

Maximum Supply
285 lt/h

Maximum Supply

Shows how many liters of water the pump can deliver in 1 hour.
Maximum Head of a Pump
11 m

Maximum Head of a Pump

Indicates how "high" the pump can push the water, measured in meters. For example, if it says "max head 15 m," it means that the pump can theoretically raise the water up to a height of 15 meters.

Installation

Cable Length
11 m
Connection Nozzle
40 mm

Connection Nozzle

Indicates the diameter of the pipe that can be connected to the pump.

  • The 32 mm & 38 mm sizes are usually used for small, flexible pipes (above-ground or inflatable pools).
  • The 50 mm & 63 mm sizes are for rigid PVC pipes (classic domestic or built-in pools).

Tip: Check the diameter of your existing pipes before making a selection.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Electric pump LEPONO LSPA 1100 with performance switch, suitable for whirlpools, hydrotherapy, and spas. It is made of high-quality corrosion-resistant plastic material, suitable for liquid circulation in a whirlpool system.

  • Power: 1100 Watt - 1.5Hp
  • Maximum water flow: 285 lt/min
  • Maximum pumping height: 11 m
  • Outlet diameter: Φ40 (1 1/2'')
  • Maximum operating pressure: 2.5bar
  • Liquid temperature: up to +60°C
  • Ambient temperature: 40 °C

Manufacturer

Manufacturer Details

Warnings & Safety Information

Main Specifications

Type
Hydromassage

Type

Hydromassage

Pump that circulates the water in the spa or jacuzzi system, sending it under pressure to the jets (special nozzles placed on the walls or the bottom of the pool) to create the hydromassage effect.
Power (hp)
1.5 hp

Power (hp)

Indicates how much power the motor has to move water in the pool. The greater the resistance in the pool circuit (pipes, filters, elevation), the more the water flow that the pump can provide is reduced.
Power (Watt)
1100 W
Power Source
Single-Phase

Power Source

Single-Phase

Operates with standard household electricity (230V). It is suitable for residential pools.
Motor Type
Constant Speed

Motor Type

Constant Speed

The classic and most economical option. It always operates at 100% of its power, providing stable and reliable water circulation, but with higher electricity consumption and noise.
Suitable for Saltwater
No

Suitable for Saltwater

Necessary if your pool uses a salt chlorinator. These pumps feature reinforced materials with high resistance to corrosion from saltwater.
Pool Size
Standard Domestic (50 to 90 m³)
Filter Included
No

Performance

Maximum Supply
285 lt/h

Maximum Supply

Shows how many liters of water the pump can deliver in 1 hour.
Maximum Head of a Pump
11 m

Maximum Head of a Pump

Indicates how "high" the pump can push the water, measured in meters. For example, if it says "max head 15 m," it means that the pump can theoretically raise the water up to a height of 15 meters.

Installation

Cable Length
11 m
Connection Nozzle
40 mm

Connection Nozzle

Indicates the diameter of the pipe that can be connected to the pump.

  • The 32 mm & 38 mm sizes are usually used for small, flexible pipes (above-ground or inflatable pools).
  • The 50 mm & 63 mm sizes are for rigid PVC pipes (classic domestic or built-in pools).

Tip: Check the diameter of your existing pipes before making a selection.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

198,00 €
44,00 €   shipping cost