Phase Relays

Schneider Electric Rail Relay

The Schneider Electric Harmony XB5 series rail-mounted relay has a complete body with an auxiliary contact. Its contacts include one normally open and one normally closed contact, and operate with...

The Schneider Electric Harmony XB5 series rail-mounted relay has a complete body with an auxiliary contact. Its contacts include one normally open and one normally closed contact, and operate with slow action.

  • Series: Harmony XB5
  • Type: Complete body with auxiliary contact
  • Contacts: 1 NO + 1 NC
  • Contact operation: Slow action
  • Contact block type: Single
  • ...
See Description & Specifications See Description & Specifications
19 90 €
Delivery Tue, 24 Nov - Mon, 30 Nov
14,00 €   shipping cost
Sent from Greece
From Getters 4.5 (117)

Learn more about invoicing

Description & Specifications

The Schneider Electric Harmony XB5 series rail-mounted relay has a complete body with an auxiliary contact. Its contacts include one normally open and one normally closed contact, and operate with slow action.

  • Series: Harmony XB5
  • Type: Complete body with auxiliary contact
  • Contacts: 1 NO + 1 NC
  • Contact operation: Slow action
  • Contact block type: Single
  • Terminals: Screw terminals
  • Connection cross-section: 1 x 0.22 mm² without cable end ferrule
  • Mounting collar material: Plastic
  • Dimensions: 30 mm wide, 42 mm high, 32 mm deep
  • Actuator travel: 1.5 mm for NC switching, 2.6 mm for NO switching, 4.3 mm total
  • Mechanical durability: 10,000,000 cycles
  • Contact material: Silver alloy (Ag/Ni)
  • Short-circuit protection: 10 A gG-type fuse
  • Rated thermal current Ith: 10 A
  • Rated insulation voltage Ui: 600 V
  • Rated impulse withstand voltage Uimp: 6 kV
  • Rated operational current Ie: 3 A at 240 V AC-15 A600, 6 A at 120 V AC-15 A600, 1.2 A at 600 V AC-15 A600, 0.1 A at 600 V DC-13 Q600, 0.27 A at 250 V DC-13 Q600, 0.55 A at 125 V DC-13 Q600
  • Electrical durability: 1,000,000 cycles AC-15 at 2 A and 230 V, at 3 A and 120 V, or at 4 A and 24 V; 1,000,000 cycles DC-13 at 0.2 A and 110 V or at 0.5 A and 24 V
  • Operating rate: 3,600 cycles/h
  • Load factor: 0.5
  • Protective coating: TH
  • Operating temperature: -40 to 70 °C
  • Storage temperature: -40 to 70 °C
  • Degree of protection: IP20
  • Standards: CSA C22.2 No. 14, EN/IEC 60947-5-4, EN/IEC 60947-1, EN/IEC 60947-5-1, UL 508, JIS C 4520
  • Certifications: GL, UL, CSA, BV, DNV, LR, RINA
  • Vibration resistance: 5 gn at 2–500 Hz
  • Shock resistance: 30 gn for 18 ms and 50 gn for 11 ms

Manufacturer

with Energy Consumption Meter
No
with Timer
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

19,90 €
14,00 €   shipping cost