Technical Data

• Manufacturer: Malexim
• Color: Anthracite
• EAN: 5907596516340
• Capacity (L): 0.7

Type Code: CYNKAL acrylic zinc painting primer 0.7L Anthracite

CYNKAL is an acrylic painting primer designed for coating surfaces made of steel, galvanized, cast iron, and light metals (such as aluminum, copper, brass). It is based on acrylic copolymer and has been modified with adhesion promoters, offering high adhesion to all substrate types.

CYNKAL contains modern corrosion-inhibiting agents that chemically bind corrosion products, providing excellent anti-corrosive properties. It contains small amounts of alcohols and their derivatives, which facilitate the penetration of the paint into the corrosion products. It interacts naturally and chemically with rust and the metal substrate.

It is highly resistant to low temperatures, corrosion, and UV radiation, maintaining color durability without chromium or lead compounds. It spreads easily.

Purpose: CYNKAL is intended for painting clean (e.g., after sandblasting) or partially cleaned elements that have undergone corrosion from steel, cast iron, galvanized steel, and light metals (aluminum, copper, brass, etc.). After drying and adhering to the substrate, the first layer forms an excellent primer for subsequent layers of CYNKAL or other solvent-based and chemical-type paints. Applying 2-4 layers of CYNKAL provides corrosion protection and an aesthetic coating.

It can also be used for painting wood, concrete, cement, and other porous substrates. It is mainly used as an acrylic primer but can also serve as an anti-corrosive primer under other paints or as an epoxy for reusing existing coatings moderately.

For moderate protection, a minimum dry film thickness of 150 microns is required. For long-term protection, the coating thickness should be increased.

CYNKAL is mostly used where, due to technical or economic reasons, full surface preparation by sandblasting is not feasible, or when some well-adhered corrosion products and old paints remain after mechanical surface treatment.

It offers measurable economic benefits by reducing the need for extensive mechanical or chemical surface preparation before painting.

Like most paints, CYNKAL is resistant to temperatures up to 200°C; however, staining may occur on the coating. The addition of reactive cross-linking resins increases the hardness of the coating and prevents streaking on surfaces at temperatures of 130-140°C.