Tikkurila Hole in 1 Filler
Extremely lightweight filling layer for holes, joints, and cracks in walls and ceilings. Ideal for application in a single layer. Minimal shrinkage <5%. Suitable for dry interior surfaces. Can be used on surfaces made of concrete, plaster, brick, and common wooden construction materials. Also applicable on previously painted surfaces. The processed surface is easy to sand and can be painted with regular roll paints. Crack-free application thickness up to 50 mm.
Recommended use: For walls and ceilings in dry indoor spaces.
Color: White
Drying time: The second layer or paint can be applied after drying of the filler under normal conditions within 2-24 hours. Complete drying in deep holes may take several days, depending on the thickness of the layer, temperature, and relative humidity.
APPLICATION INSTRUCTIONS
Application conditions: The surface must be dry, air temperature at least +5ºC, and relative humidity below 80%.
Surface preparation:
- Unpainted surfaces: Remove all dirt, dust, and loose particles from the surface. Apply HOLE-IN-1 directly. Porous surfaces, such as plaster, should be prepared for better adhesion.
- Previously painted surfaces: Wash painted surfaces with the cleaner Seinäpesu. Allow the surface to dry before further processing. Remove peeling or powdery paint by scraping and sand glossy surfaces to a matt finish. Remove dust from sanding.
Application: Apply HOLE-IN-1 with a spatula. After drying, sand the surface and remove sanding dust. If necessary, apply a new layer of filler. For the best smooth surface, apply a finish over the filler.
Manufacturer
OEMDimensions
- Colour
- Beige
- Type
- Powder
- Application Surface
- Wall / Plaster, Wood
- Sanding Capability
- Yes
- No Shrinkage / Crack Resistance
- No
Quantity
- Capacity
- 250 ml
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.