Skroutz.mt

Water Flow Timer Mechanical Manual Irrigation Controller 1-3/4 120min
Irrigation Programmers

Water Flow Timer Mechanical Manual Irrigation Controller 1-3/4 120min

The Water Flow Timer mechanical watering timer adjusts the watering duration using a rotary dial and automatically shuts off the water flow when the selected time has elapsed. It works without...

The Water Flow Timer mechanical watering timer adjusts the watering duration using a rotary dial and automatically shuts off the water flow when the selected time has elapsed. It works without electricity or batteries and can be switched to manual operation at any time.

  • Operation: Mechanical
  • Watering duration: Up to 120 minutes
  • Tap connection: 1"
  • Thread...
See full description See full description
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

The Water Flow Timer mechanical watering timer adjusts the watering duration using a rotary dial and automatically shuts off the water flow when the selected time has elapsed. It works without electricity or batteries and can be switched to manual operation at any time.

  • Operation: Mechanical
  • Watering duration: Up to 120 minutes
  • Tap connection: 1"
  • Thread reducer: 3/4"
  • Manual watering: Available
  • Power supply: No electricity or batteries required

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Features & Settings

Mode
Mechanical
Expandable
No

Expandable

You can use an extension board to increase the number of solenoid valves (stops) in your system for more flexibility.
Rain Sensor Connection
No

Rain Sensor Connection

The sensor connects to a special port of the programmer and functions as a switch, preventing unnecessary water consumption and protecting plants from overwatering.
Permanent Memory
No

Permanent Memory

Ensures that the watering schedule will not be lost even after a power outage. This way, when the power is restored, the programmer continues to operate normally with your settings, without needing to be programmed again from scratch!

Connection & Sockets

with Solenoid Valve
No

with Solenoid Valve

When the irrigation programmer has an electrovane, it means that it can automatically control the flow of water through electronic valves.
Connection Thread
1", 3/4"

Connection Thread

The connection thread is the point where the irrigation programmer connects to the faucet or other irrigation components. 

Watering Settings

Time Delay
No

Time Delay

The time delay allows for postponing irrigation for a specific period without changing the main program. It is used for temporary interruption due to rain or maintenance, contributing to water conservation and adjusting irrigation to weather conditions.
Manual Watering
Yes

Manual Watering

Manual watering allows the activation of watering immediately, without affecting the scheduled program. It is useful for testing, additional watering during dry periods, or when immediate moisture is needed for the plants.
Weekly Scheduling
No

Weekly Scheduling

Allows the setting of different watering schedules for each day of the week, providing flexibility in adjusting the frequency and duration of irrigation according to the garden's needs.
Hourly Programming
No

Hourly Programming

It is the setting that determines the total watering duration. It shows how long the watering will last each time the programmer is activated.
Cyclic Programming
No

Cyclic Programming

Watering is activated at recurring time intervals, regardless of the time of day. The user sets an interval (e.g., every 3/6/9 hours)

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Water Flow Timer mechanical watering timer adjusts the watering duration using a rotary dial and automatically shuts off the water flow when the selected time has elapsed. It works without electricity or batteries and can be switched to manual operation at any time.

  • Operation: Mechanical
  • Watering duration: Up to 120 minutes
  • Tap connection: 1"
  • Thread reducer: 3/4"
  • Manual watering: Available
  • Power supply: No electricity or batteries required

Manufacturer

Manufacturer Details

Warnings & Safety Information

Features & Settings

Mode
Mechanical
Expandable
No

Expandable

You can use an extension board to increase the number of solenoid valves (stops) in your system for more flexibility.
Rain Sensor Connection
No

Rain Sensor Connection

The sensor connects to a special port of the programmer and functions as a switch, preventing unnecessary water consumption and protecting plants from overwatering.
Permanent Memory
No

Permanent Memory

Ensures that the watering schedule will not be lost even after a power outage. This way, when the power is restored, the programmer continues to operate normally with your settings, without needing to be programmed again from scratch!

Connection & Sockets

with Solenoid Valve
No

with Solenoid Valve

When the irrigation programmer has an electrovane, it means that it can automatically control the flow of water through electronic valves.
Connection Thread
1", 3/4"

Connection Thread

The connection thread is the point where the irrigation programmer connects to the faucet or other irrigation components. 

Watering Settings

Time Delay
No

Time Delay

The time delay allows for postponing irrigation for a specific period without changing the main program. It is used for temporary interruption due to rain or maintenance, contributing to water conservation and adjusting irrigation to weather conditions.
Manual Watering
Yes

Manual Watering

Manual watering allows the activation of watering immediately, without affecting the scheduled program. It is useful for testing, additional watering during dry periods, or when immediate moisture is needed for the plants.
Weekly Scheduling
No

Weekly Scheduling

Allows the setting of different watering schedules for each day of the week, providing flexibility in adjusting the frequency and duration of irrigation according to the garden's needs.
Hourly Programming
No

Hourly Programming

It is the setting that determines the total watering duration. It shows how long the watering will last each time the programmer is activated.
Cyclic Programming
No

Cyclic Programming

Watering is activated at recurring time intervals, regardless of the time of day. The user sets an interval (e.g., every 3/6/9 hours)

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.