Product: Presto fast-drying filler 200ml

The filler is a fast-drying latex-based product, suitable for filling scratches and partially smoothing small surfaces in dry spaces before painting with latex or alkyd paints. It is suitable for new and previously painted wooden and chipboard surfaces, MDF surfaces, plastered and filled substrates.

Recommended use: Walls, ceilings, furniture, doors.

Color: White

Application method: Applied with a smooth spatula.

Drying time (23°C and 50% relative humidity): 1-2 hours, depending on coating thickness, temperature, and relative humidity.

APPLICATION INSTRUCTIONS

Application conditions: All surfaces to be covered must be dry, air temperature should not be below +5°C or above +25°C, and relative humidity should be below 80%.

Surface preparation:

• Untouched surfaces: Clean the surface from dirt. Wipe off dust and other loose particles. Smooth untreated surfaces with Presto filler.
• Previously painted surfaces: Wash painted surfaces with Maalipesu cleaner. After the surface dries, remove as much paint as possible with a scraper and sand the painted surface to achieve a matte finish. Remove sanding dust.

Application: Apply Presto filler with a smooth spatula. Allow to dry, sand the surface and remove sanding dust. The surface can only be sanded when dry. First fill all larger cracks, nail heads, etc. with suitable Presto filler and sand the surface. The smoothed surface will be solid and smooth. Smaller areas can be finished immediately with a colored repair filler.

Coating: The smooth surface is hard and smooth and can be painted directly with latex or alkyd paint. Apply the filler over sealing tape. After drying, sand the surface and remove sanding dust.