Skroutz.mt

Ospel Dimmer Switch with LED Frame Rotary 100W in White Colour
Dimmer Switches

Ospel Dimmer Switch with LED Frame Rotary 100W in White Colour

The dimmer switch is used to turn lighting on and off, as well as to adjust the light intensity in apartments or other spaces such as offices and stores. It is turned on and off by pressing the button...

The dimmer switch is used to turn lighting on and off, as well as to adjust the light intensity in apartments or other spaces such as offices and stores. It is turned on and off by pressing the button and adjusted by rotating it. For higher brightness, rotate the knob clockwise.

Compatible lighting

  • LED 230V - dimmable sources 0-100W maximum 10 pieces.
  • LED...
See full description See full description

  • Compatibility

    LED

    Suitable for LED lamps marked as "Dimmable". Ensures smooth adjustment without flickering.

  • Function

    Rotary

    Adjusting the intensity using the classic rotary switch (dial) for precise lighting control.

  • Type

    Complete

    The mechanism, front face, and decorative frame of the switch are included.
  • See all
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

The dimmer switch is used to turn lighting on and off, as well as to adjust the light intensity in apartments or other spaces such as offices and stores. It is turned on and off by pressing the button and adjusted by rotating it. For higher brightness, rotate the knob clockwise.

Compatible lighting

  • LED 230V - dimmable sources 0-100W maximum 10 pieces.
  • LED 12V - uses dimmable DC electronic transformer or dimmable AC electronic transformer with AC/DC converter.
  • GLS - Halogen, filament 230V.
  • CFL - compact dimmable.
  • 12V halogen - with dimmable electronic transformer.

Not compatible with toroidal core transformers and other inductive loads. Connecting such devices may cause damage to the dimmer switch. The LED light source must be dimmable, with relevant information usually found on the packaging or the light source and indicated by the corresponding symbol.

Automatic timer

The dimmer switch can be used as an automatic timer, which will turn off the lighting after a specified time (from 30 seconds to 128 minutes) when it is turned on.

"Bedtime" Mode

By pressing and holding the button (for more than 2.5 seconds), the "Bedtime" mode is activated, which turns off the lighting after a 90-second delay. During this mode, all features of the dimmer switch are available.

Operation in floor system

The dimmer switch allows operation in a floor system with a "light" or "bell" switch without backlighting. It is turned on and off by a short press of the button. To adjust brightness, hold the button for more than 2 seconds.

Technical specifications

  • Manufacturer code: ŁP-8SL2/m/00
  • Color: White
  • Mounting type: Flush mount
  • Safety rating: IP-20
  • Material: Plastic
  • Rated voltage: 230V
  • Connection type: Screw terminals
  • Power supply: 230V ~50Hz
  • Load range: LED: 0-100W, GLS: 10-250W
  • Load types:
    • Halogen
    • Filament
    • LED
  • Frame included: NO
  • LED compatibility: yes

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Compatibility
LED

Compatibility

LED

Suitable for LED lamps marked as "Dimmable". Ensures smooth adjustment without flickering.
Type
Complete

Type

Complete

The mechanism, front face, and decorative frame of the switch are included.
Mode
Rotary

Mode

Rotary
Adjusting the intensity using the classic rotary switch (dial) for precise lighting control.
Power
100 W

Power

Indicates the total load (Watt) that the dimmer can safely handle. 

Attention: For LED bulbs, the maximum power is usually much lower than the nominal value (e.g. a 300W dimmer may only support up to 60W-100W for LEDs). Never exceed the limit to avoid overheating the mechanism.
Colour
White
Power Supply
230V

Power Supply

230V

The device connects directly to the wall power supply. It is the standard voltage for LED bulbs and home switches. No additional transformer is needed for operation.

Additional Features

Illuminated
No

Illuminated

With a light indicator for easy location in the dark
Aller Retour
No

Aller Retour

It allows you to control the same light fixture from two different points in the space. Ideal for corridors, staircases, or large rooms where you want to turn the light on from one side and turn it off (or adjust it) from the other.

Professional Control

DMX512
No

DMX512

Protocol for professional control of LED strips. It is the best choice if you want many LED strips in your home to change color or brightness simultaneously and without any delay.

Note: Not for simple light bulbs. It requires a special cable for transmitting the command and a "decoder" (DMX Decoder) before each strip.
DALI
No

DALI

It allows you to group and control each lighting fixture individually from a central computer or panel. It is considered the most reliable system for professional spaces.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The dimmer switch is used to turn lighting on and off, as well as to adjust the light intensity in apartments or other spaces such as offices and stores. It is turned on and off by pressing the button and adjusted by rotating it. For higher brightness, rotate the knob clockwise.

Compatible lighting

  • LED 230V - dimmable sources 0-100W maximum 10 pieces.
  • LED 12V - uses dimmable DC electronic transformer or dimmable AC electronic transformer with AC/DC converter.
  • GLS - Halogen, filament 230V.
  • CFL - compact dimmable.
  • 12V halogen - with dimmable electronic transformer.

Not compatible with toroidal core transformers and other inductive loads. Connecting such devices may cause damage to the dimmer switch. The LED light source must be dimmable, with relevant information usually found on the packaging or the light source and indicated by the corresponding symbol.

Automatic timer

The dimmer switch can be used as an automatic timer, which will turn off the lighting after a specified time (from 30 seconds to 128 minutes) when it is turned on.

"Bedtime" Mode

By pressing and holding the button (for more than 2.5 seconds), the "Bedtime" mode is activated, which turns off the lighting after a 90-second delay. During this mode, all features of the dimmer switch are available.

Operation in floor system

The dimmer switch allows operation in a floor system with a "light" or "bell" switch without backlighting. It is turned on and off by a short press of the button. To adjust brightness, hold the button for more than 2 seconds.

Technical specifications

  • Manufacturer code: ŁP-8SL2/m/00
  • Color: White
  • Mounting type: Flush mount
  • Safety rating: IP-20
  • Material: Plastic
  • Rated voltage: 230V
  • Connection type: Screw terminals
  • Power supply: 230V ~50Hz
  • Load range: LED: 0-100W, GLS: 10-250W
  • Load types:
    • Halogen
    • Filament
    • LED
  • Frame included: NO
  • LED compatibility: yes

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Compatibility
LED

Compatibility

LED

Suitable for LED lamps marked as "Dimmable". Ensures smooth adjustment without flickering.
Type
Complete

Type

Complete

The mechanism, front face, and decorative frame of the switch are included.
Mode
Rotary

Mode

Rotary
Adjusting the intensity using the classic rotary switch (dial) for precise lighting control.
Power
100 W

Power

Indicates the total load (Watt) that the dimmer can safely handle. 

Attention: For LED bulbs, the maximum power is usually much lower than the nominal value (e.g. a 300W dimmer may only support up to 60W-100W for LEDs). Never exceed the limit to avoid overheating the mechanism.
Colour
White
Power Supply
230V

Power Supply

230V

The device connects directly to the wall power supply. It is the standard voltage for LED bulbs and home switches. No additional transformer is needed for operation.

Additional Features

Illuminated
No

Illuminated

With a light indicator for easy location in the dark
Aller Retour
No

Aller Retour

It allows you to control the same light fixture from two different points in the space. Ideal for corridors, staircases, or large rooms where you want to turn the light on from one side and turn it off (or adjust it) from the other.

Professional Control

DMX512
No

DMX512

Protocol for professional control of LED strips. It is the best choice if you want many LED strips in your home to change color or brightness simultaneously and without any delay.

Note: Not for simple light bulbs. It requires a special cable for transmitting the command and a "decoder" (DMX Decoder) before each strip.
DALI
No

DALI

It allows you to group and control each lighting fixture individually from a central computer or panel. It is considered the most reliable system for professional spaces.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.