Skroutz.mt

STR GP2 Black / Red Matt Motorcycle Helmet Jet ECE 22.06 with Sun Visor
Motorcycle Helmets

STR GP2 Black / Red Matt Motorcycle Helmet Jet ECE 22.06 with Sun Visor Code: 693-30-0706200-20104

The helmet is made of EPS, which reduces the helmet’s volume while ensuring the same level of safety. It includes:

  • Removable inner hypoallergenic and washable lining.
  • Closure system with Micrometric....

The helmet is made of EPS, which reduces the helmet’s volume while ensuring the same level of safety. It includes:

  • Removable inner hypoallergenic and washable lining.
  • Closure system with Micrometric.
  • Large transparent anti-scratch visor approved as Optical Grade Material.
  • Internal sun visor.
  • Quick-release front visor.
  • Space for sunglasses or prescription...
See full description See full description

  • Type

    Jet

    The jet helmet is lightweight and comfortable as it is easy to put on and take off. It offers great visibility and is cool. However, it lacks in safety compared to a full-face helmet because it leaves a large area of the face uncovered.

  • Material

    Thermoplastic

    This is a plastic material mainly used in more affordable and entry-level helmets.

    Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.

  • Certification

    Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

    ECE 22.06

    New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.

  • Pinlock (Anti-fog Film)

    Not Supported

    It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.
  • Color Finish Matt
  • See all

Size

STR size guide
STR size guide

Size

STR size guide
International
Review the product
Product report

Description

Description

The helmet is made of EPS, which reduces the helmet’s volume while ensuring the same level of safety. It includes:

  • Removable inner hypoallergenic and washable lining.
  • Closure system with Micrometric.
  • Large transparent anti-scratch visor approved as Optical Grade Material.
  • Internal sun visor.
  • Quick-release front visor.
  • Space for sunglasses or prescription glasses.
  • Internal compartment for intercom installation.
  • Special anti-UV coating to reduce heat buildup on the helmet’s outer shell.
  • Approved according to the ECE 22.06 standard.

SkuDescription|Brand

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
693-30-0706200-20104

Dimensions

Type
Jet

Type

Jet

The jet helmet is lightweight and comfortable as it is easy to put on and take off. It offers great visibility and is cool. However, it lacks in safety compared to a full-face helmet because it leaves a large area of the face uncovered.
Colour
Black
Color Finish
Matt
Material
Thermoplastic

Material

Thermoplastic

This is a plastic material mainly used in more affordable and entry-level helmets.

Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.
Clasp
Microlock

Clasp

Microlock

The helmet has a retractable mechanism that fastens on the other side. 2. With this mechanism, we can easily put on and take off the helmet. 3. Compared to the Double D ring, it is less durable and more prone to breakage.
Certification
ECE 22.06

Certification

Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

ECE 22.06

New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.
Pinlock (Anti-fog Film)
Not Supported

Pinlock (Anti-fog Film)

Not Supported

It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.

Extra Features

Removable / Washable Interior
Yes

Removable / Washable Interior

The helmet's interior lining can be removed and washed.
Intercom Support
Yes

Intercom Support

The helmet features space for the installation and support of intercom, such as for a speaker, cable, and microphone, so as not to create pressure on the head. 

It is usually very useful for long trips where riders want to have communication during the ride.
Glasses Holder
Yes
Sun Visor
Yes

Sun Visor

The helmet has an internal sun visor which is usually pulled down from the left side of the helmet for protection from the sun.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The helmet is made of EPS, which reduces the helmet’s volume while ensuring the same level of safety. It includes:

  • Removable inner hypoallergenic and washable lining.
  • Closure system with Micrometric.
  • Large transparent anti-scratch visor approved as Optical Grade Material.
  • Internal sun visor.
  • Quick-release front visor.
  • Space for sunglasses or prescription glasses.
  • Internal compartment for intercom installation.
  • Special anti-UV coating to reduce heat buildup on the helmet’s outer shell.
  • Approved according to the ECE 22.06 standard.

SkuDescription|Brand

Manufacturer Details

Warnings & Safety Information
Product Number
693-30-0706200-20104

Dimensions

Type
Jet

Type

Jet

The jet helmet is lightweight and comfortable as it is easy to put on and take off. It offers great visibility and is cool. However, it lacks in safety compared to a full-face helmet because it leaves a large area of the face uncovered.
Colour
Black
Color Finish
Matt
Material
Thermoplastic

Material

Thermoplastic

This is a plastic material mainly used in more affordable and entry-level helmets.

Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.
Clasp
Microlock

Clasp

Microlock

The helmet has a retractable mechanism that fastens on the other side. 2. With this mechanism, we can easily put on and take off the helmet. 3. Compared to the Double D ring, it is less durable and more prone to breakage.
Certification
ECE 22.06

Certification

Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

ECE 22.06

New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.
Pinlock (Anti-fog Film)
Not Supported

Pinlock (Anti-fog Film)

Not Supported

It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.

Extra Features

Removable / Washable Interior
Yes

Removable / Washable Interior

The helmet's interior lining can be removed and washed.
Intercom Support
Yes

Intercom Support

The helmet features space for the installation and support of intercom, such as for a speaker, cable, and microphone, so as not to create pressure on the head. 

It is usually very useful for long trips where riders want to have communication during the ride.
Glasses Holder
Yes
Sun Visor
Yes

Sun Visor

The helmet has an internal sun visor which is usually pulled down from the left side of the helmet for protection from the sun.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

59,00 €
14,00 €   shipping cost