Skroutz.mt

HP AP-605R12-EU Access Point Wi‑Fi 6E Dual Band (2.4 & 5GHz) Single Kit
Access Points

HP AP-605R12-EU Access Point Wi‑Fi 6E Dual Band (2.4 & 5GHz) Single Kit

The HPE Aruba Networking AP-605R12-EU is an indoor Remote Access Point (R8N19A) featuring Wi-Fi 6E (802.11ax) with tri-radio (2.4 / 5 / 6 GHz) operating simultaneously with 2x2 MIMO.

Includes:

  • ...

The HPE Aruba Networking AP-605R12-EU is an indoor Remote Access Point (R8N19A) featuring Wi-Fi 6E (802.11ax) with tri-radio (2.4 / 5 / 6 GHz) operating simultaneously with 2x2 MIMO.

Includes:

  • Integrated CAT12 LTE cell for backup/primary WAN.
  • 2.5 Gbps Ethernet port and dedicated 1 Gbps uplink port.
  • Integrated omnidirectional antennas.
  • Aruba enterprise...
See full description See full description

  • Frequency

    The frequencies at which the Access Point can transmit.
    2. Additional frequencies allow for greater speed on more devices.

    Dual Band (2.4 & 5GHz)

    They transmit signals on two frequencies. They offer higher speeds compared to single and connect more devices. The 2.4Ghz frequency is the most common and, as it has a large range, is usually congested by neighboring Wi-Fi signals, making communication between devices more difficult. The 5Ghz provides higher speeds than the 2.4Ghz but is more sensitive to obstacles (e.g. walls) that reduce its range. This difference, as well as its more limited use, helps to have fewer interferences from other networks.

  • Wi-Fi Generation

    Wi‑Fi 6E

    Same as Wi-Fi 6 with the ability to use some additional frequencies in the 6GHz band. For most users, there is no significant difference. Like Wi-Fi 6, it offers speeds up to 40% higher than Wi-Fi 5, coordinates communication with connected devices to consume less battery, and works better in environments with many Wi-Fi devices.

    Ideal for homes with many smart devices.

    Compatible with all previous generations.
  • See all
2631 66 €
Delivery Fri, 31 Jul - Thu, 06 Aug
14,00 €   shipping cost
Sent from Greece
From Globi 5.0 (14)
5.0 (14 reviews)
Greece
5 pieces
See Networking on the page of Globi
Review the product
Product report

Description

Description

The HPE Aruba Networking AP-605R12-EU is an indoor Remote Access Point (R8N19A) featuring Wi-Fi 6E (802.11ax) with tri-radio (2.4 / 5 / 6 GHz) operating simultaneously with 2x2 MIMO.

Includes:

  • Integrated CAT12 LTE cell for backup/primary WAN.
  • 2.5 Gbps Ethernet port and dedicated 1 Gbps uplink port.
  • Integrated omnidirectional antennas.
  • Aruba enterprise security and management features.

Designed for remote workers, small offices, and retail, it supports HE160 on 6 GHz, up to seven 160 MHz channels on 6 GHz, up to 512 connected clients per radio, and up to 16 BSSIDs per radio.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Technical Specifications

Frequency
Dual Band (2.4 & 5GHz)

Frequency

The frequencies at which the Access Point can transmit.
2. Additional frequencies allow for greater speed on more devices.

Dual Band (2.4 & 5GHz)
They transmit signals on two frequencies. They offer higher speeds compared to single and connect more devices. The 2.4Ghz frequency is the most common and, as it has a large range, is usually congested by neighboring Wi-Fi signals, making communication between devices more difficult. The 5Ghz provides higher speeds than the 2.4Ghz but is more sensitive to obstacles (e.g. walls) that reduce its range. This difference, as well as its more limited use, helps to have fewer interferences from other networks.
Wi-Fi Generation
Wi‑Fi 6E

Wi-Fi Generation

Wi‑Fi 6E

Same as Wi-Fi 6 with the ability to use some additional frequencies in the 6GHz band. For most users, there is no significant difference. Like Wi-Fi 6, it offers speeds up to 40% higher than Wi-Fi 5, coordinates communication with connected devices to consume less battery, and works better in environments with many Wi-Fi devices.

Ideal for homes with many smart devices.

Compatible with all previous generations.
IEEE Networking Standards
802.11 b/g/n, 802.11a, 802.11ac, 802.11ax
Wi-Fi Mesh Network
No

Wi-Fi Mesh Network

Technology that allows the creation of a unified, flexible network where multiple Access Points work together to provide broader and more stable Wi-Fi coverage. Ideal for large homes, offices, and businesses.
Ethernet Backhaul
No

Ethernet Backhaul

The wired connection between access points using an Ethernet cable, so that their communication does not burden the wireless network. It offers greater stability, higher speeds, and better coverage compared to wireless backhaul.
MIMO Technology
2x2

MIMO Technology

Technology that uses multiple antennas for simultaneous sending and receiving of data. This improves the speed and stability of Wi-Fi, especially when there are many connected devices.

General Characteristics

Placement
Indoor
Packaging
Single Kit

Installation Type

Ceiling
No

Ceiling

Ceiling installation for uniform coverage of the area from above. Ideal for offices, shops, and professional spaces.
Wall
No

Wall

Wall mounting for targeted coverage of specific areas or rooms. Suitable for more flexible installations.
Board games
No

Board games

Placement on a surface (e.g. desk or shelf) without permanent installation. Ideal for easy use and quick setup.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The HPE Aruba Networking AP-605R12-EU is an indoor Remote Access Point (R8N19A) featuring Wi-Fi 6E (802.11ax) with tri-radio (2.4 / 5 / 6 GHz) operating simultaneously with 2x2 MIMO.

Includes:

  • Integrated CAT12 LTE cell for backup/primary WAN.
  • 2.5 Gbps Ethernet port and dedicated 1 Gbps uplink port.
  • Integrated omnidirectional antennas.
  • Aruba enterprise security and management features.

Designed for remote workers, small offices, and retail, it supports HE160 on 6 GHz, up to seven 160 MHz channels on 6 GHz, up to 512 connected clients per radio, and up to 16 BSSIDs per radio.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Technical Specifications

Frequency
Dual Band (2.4 & 5GHz)

Frequency

The frequencies at which the Access Point can transmit.
2. Additional frequencies allow for greater speed on more devices.

Dual Band (2.4 & 5GHz)
They transmit signals on two frequencies. They offer higher speeds compared to single and connect more devices. The 2.4Ghz frequency is the most common and, as it has a large range, is usually congested by neighboring Wi-Fi signals, making communication between devices more difficult. The 5Ghz provides higher speeds than the 2.4Ghz but is more sensitive to obstacles (e.g. walls) that reduce its range. This difference, as well as its more limited use, helps to have fewer interferences from other networks.
Wi-Fi Generation
Wi‑Fi 6E

Wi-Fi Generation

Wi‑Fi 6E

Same as Wi-Fi 6 with the ability to use some additional frequencies in the 6GHz band. For most users, there is no significant difference. Like Wi-Fi 6, it offers speeds up to 40% higher than Wi-Fi 5, coordinates communication with connected devices to consume less battery, and works better in environments with many Wi-Fi devices.

Ideal for homes with many smart devices.

Compatible with all previous generations.
IEEE Networking Standards
802.11 b/g/n, 802.11a, 802.11ac, 802.11ax
Wi-Fi Mesh Network
No

Wi-Fi Mesh Network

Technology that allows the creation of a unified, flexible network where multiple Access Points work together to provide broader and more stable Wi-Fi coverage. Ideal for large homes, offices, and businesses.
Ethernet Backhaul
No

Ethernet Backhaul

The wired connection between access points using an Ethernet cable, so that their communication does not burden the wireless network. It offers greater stability, higher speeds, and better coverage compared to wireless backhaul.
MIMO Technology
2x2

MIMO Technology

Technology that uses multiple antennas for simultaneous sending and receiving of data. This improves the speed and stability of Wi-Fi, especially when there are many connected devices.

General Characteristics

Placement
Indoor
Packaging
Single Kit

Installation Type

Ceiling
No

Ceiling

Ceiling installation for uniform coverage of the area from above. Ideal for offices, shops, and professional spaces.
Wall
No

Wall

Wall mounting for targeted coverage of specific areas or rooms. Suitable for more flexible installations.
Board games
No

Board games

Placement on a surface (e.g. desk or shelf) without permanent installation. Ideal for easy use and quick setup.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

2.631,66 €
14,00 €   shipping cost