Skroutz.mt

Mirka DEOS II 383 Pulse Sander 300W with Speed Setting and with Dust Suction System
Sanders

Mirka DEOS II 383 Pulse Sander 300W with Speed Setting and with Dust Suction System

Key features:

  • 300W Brushless motor
  • Low profile height of 101mm
  • Bluetooth connection with myMirka
  • Plastic Systainer case
See full description

  • Power

    Indicates the power of the motor.

    Higher power → stronger material removal and more effective sanding, especially on hard materials.

  • Speed Setting

    Ability to control the rotation speed of the tool.

    1

  • Eccentricity

    Refers to the distance traveled by the rotation of the base/disc from its center (small eccentricity for finishing, large for fast removal).

    3

    General sanding, finishing of wood or paint.

  • Oscillation Range

    Refers to the amount/length of the back-and-forth or up-and-down movement of the disc or base (greater range removes more material, smaller range provides a more precise finish).

    3

    General sanding, wood or paint finishing.

  • RPM (Revolutions Per Minute)

    • High speeds → fast material removal
    • Low speeds → finer, more controlled finish
  • Reception Diameter 3 mm

  • Brushless

    Motor without brushes, offering greater autonomy and longer lifespan.
  • Weight (Net) 1000 gr
  • See all

User Manual

Carrying case

  1. Without

    from 670,00 €

  2. Case

    from 680,00 €

Review the product
Product report

Description

Description

You control the work surface with absolute precision thanks to the innovative low-profile design and the powerful brushless motor.

At a glance

  • 300W Brushless motor: Provides 20% increased power for constant speed under load.
  • Low 101mm height profile: Ensures a low center of gravity for maximum control and precision.
  • Bluetooth connection with myMirka: Allows real-time vibration monitoring.
  • Systainer plastic case: Offers secure storage and easy transport to the job site.

Top power without compromise

Forget about speed drops when you apply pressure to the tool. With the upgraded 300W brushless motor, you get 20% more power in your hands for demanding tasks in bodywork and woodworking. The brushless technology guarantees a long service life, while keeping the sander incredibly lightweight at just one kilogram, ensuring a comfortable workflow.

Smart control and absolute ergonomics

Maintain full control with the low profile design that brings you just 10 centimeters away from the surface. At the same time, connect the sander via Bluetooth to the myMirka app to monitor vibration levels live. The built-in sensor protects your health, ensuring a smooth and comfortable experience even after many hours.

Specifications

  • Input Power: 300 W
  • Mains Voltage: 220–240 VAC
  • Operating Speed: 5,000 – 10,000 rpm (adjustable)
  • Orbit: 3.0 mm (Orbit)
  • Pad Size: 70 x 198 mm
  • Tool Height: 101 mm
  • Weight: 1.0 kg
  • Noise Level: 71 dB(A)
  • Vibration Level: 2.6 m/s²
  • Connectivity: Bluetooth (via the myMirka app)
  • Dust Extraction System: Central Vacuum Ready (vacuum cleaner connection)

Package Contents

  • Mirka DEOS II 383 Orbital Sander
  • Plastic carrying case (Systainer)

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Guides

User Manual

Specifications

Type
Pulse Sander

Type

Pulse Sander

For smoothing large surfaces with rectangular sanding base.
Power Source
Electric

Power Source

The method of supplying power to the tool.
Eccentricity
3 mm

Eccentricity: 3

Refers to the distance traveled by the rotation of the base/disc from its center (small eccentricity for finishing, large for fast removal).


General sanding, finishing of wood or paint.
Oscillation Range
3 mm

Oscillation Range: 3

Refers to the amount/length of the back-and-forth or up-and-down movement of the disc or base (greater range removes more material, smaller range provides a more precise finish).


General sanding, wood or paint finishing.
Socket Diameter
3 mm
Net Weight
1000 gr
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Power Specifications

Power
300 W

Power

Indicates the power of the motor.

Higher power → stronger material removal and more effective sanding, especially on hard materials.

Features & Functions

Dust Suction System
Yes

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
Yes

Speed Setting

Ability to control the rotation speed of the tool.
Turns
10000 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Noise
71 dB
Brushless
Yes

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
No

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
Yes

Sandpaper / Belt Specifications

Diameter
198 mm
Sandpaper Dimensions
198x70 mm
Sand Belt Length
198 mm
Sand Belt Width (min)
3 mm
Sand Belt Width (max)
101 mm
Velcro
No

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Case
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

You control the work surface with absolute precision thanks to the innovative low-profile design and the powerful brushless motor.

At a glance

  • 300W Brushless motor: Provides 20% increased power for constant speed under load.
  • Low 101mm height profile: Ensures a low center of gravity for maximum control and precision.
  • Bluetooth connection with myMirka: Allows real-time vibration monitoring.
  • Systainer plastic case: Offers secure storage and easy transport to the job site.

Top power without compromise

Forget about speed drops when you apply pressure to the tool. With the upgraded 300W brushless motor, you get 20% more power in your hands for demanding tasks in bodywork and woodworking. The brushless technology guarantees a long service life, while keeping the sander incredibly lightweight at just one kilogram, ensuring a comfortable workflow.

Smart control and absolute ergonomics

Maintain full control with the low profile design that brings you just 10 centimeters away from the surface. At the same time, connect the sander via Bluetooth to the myMirka app to monitor vibration levels live. The built-in sensor protects your health, ensuring a smooth and comfortable experience even after many hours.

Specifications

  • Input Power: 300 W
  • Mains Voltage: 220–240 VAC
  • Operating Speed: 5,000 – 10,000 rpm (adjustable)
  • Orbit: 3.0 mm (Orbit)
  • Pad Size: 70 x 198 mm
  • Tool Height: 101 mm
  • Weight: 1.0 kg
  • Noise Level: 71 dB(A)
  • Vibration Level: 2.6 m/s²
  • Connectivity: Bluetooth (via the myMirka app)
  • Dust Extraction System: Central Vacuum Ready (vacuum cleaner connection)

Package Contents

  • Mirka DEOS II 383 Orbital Sander
  • Plastic carrying case (Systainer)

Manufacturer

Manufacturer Details

Warnings & Safety Information

Product Guides

User Manual

Specifications

Type
Pulse Sander

Type

Pulse Sander

For smoothing large surfaces with rectangular sanding base.
Power Source
Electric

Power Source

The method of supplying power to the tool.
Eccentricity
3 mm

Eccentricity: 3

Refers to the distance traveled by the rotation of the base/disc from its center (small eccentricity for finishing, large for fast removal).


General sanding, finishing of wood or paint.
Oscillation Range
3 mm

Oscillation Range: 3

Refers to the amount/length of the back-and-forth or up-and-down movement of the disc or base (greater range removes more material, smaller range provides a more precise finish).


General sanding, wood or paint finishing.
Socket Diameter
3 mm
Net Weight
1000 gr
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Power Specifications

Power
300 W

Power

Indicates the power of the motor.

Higher power → stronger material removal and more effective sanding, especially on hard materials.

Features & Functions

Dust Suction System
Yes

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
Yes

Speed Setting

Ability to control the rotation speed of the tool.
Turns
10000 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Noise
71 dB
Brushless
Yes

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
No

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
Yes

Sandpaper / Belt Specifications

Diameter
198 mm
Sandpaper Dimensions
198x70 mm
Sand Belt Length
198 mm
Sand Belt Width (min)
3 mm
Sand Belt Width (max)
101 mm
Velcro
No

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Case
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

680,00 €
14,00 €   shipping cost