Matte Sand Plaster Mat 10 creates a fine sand-textured decorative finish on interior walls and ceilings. The ready-to-use paste is applied in one coat with a brush and can be diluted with up to 10% water. It has a matte, opaque appearance and dries in approximately 6 hours.
Before application, stir until the colour is uniform. Prime the surface with the specially designed BALITURA FONDO primer, included in the kit, to balance absorbency, improve adhesion, remove dust and ensure an even colour. Apply using short strokes, without pressing too hard on the tool, working continuously from edge to edge. Masking tape is recommended to protect adjoining walls or floors.
- Colour: Beige
- Base: Water-based
- Form: Ready-to-use paste
- Application surface: Interior walls and ceilings
- Appearance: Matte and opaque
- Texture: Fine sand texture
- Number of coats: 1
- Application: Brush
- Dilution: Up to 10% water
- Drying time: Approximately 6 hours
- Coverage: Up to 8 m² per litre
- Package contents: BALITURA FONDO primer
- Properties: Free from solvents, volatile organic compounds and chemicals harmful to health and the environment
Manufacturer
OEM- Attributes
- Water
- Colour
- Beige
- Type
- Paste (Ready-made)
- Application Surface
- Wall / Plaster
- Sanding Capability
- No
- No Shrinkage / Crack Resistance
- No
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.