Skroutz.mt

Shelly Smart Switch Z-Wave 10A 091144
Intermediate Switches

Shelly Smart Switch Z-Wave 10A 091144 Code: 091144

The SHELLY Wave 2PM lighting switch enables control of lighting and electrical appliances using Z-Wave Long Range technology. It features two independent channels, each with a load capacity of up to...

The SHELLY Wave 2PM lighting switch enables control of lighting and electrical appliances using Z-Wave Long Range technology. It features two independent channels, each with a load capacity of up to 10 A (up to 16 A in total), making it easy to manage two devices or circuits simultaneously.

  • Built-in energy metering function for monitoring power consumption...
See full description See full description

  • Connectivity

    Z-Wave

    Reliable wireless connectivity technology with zero interference.

  • Usage

    Lighting

    For remote control of lamps and lighting fixtures.

  • Compatible Application

    The compatible app that you download to your mobile phone to control the switch remotely.

  • Maximum Load

    It is the maximum amount of current that the switch can withstand without burning out. It shows you how many or how powerful devices you can connect: for simple lights, 10A is enough, while for power-hungry devices (such as a water heater) more Amperes are required.

    For example, a typical LED bulb (e.g. 10W) draws very little current, about 0.04 Amperes. This means that a standard smart switch of 10A is more than sufficient for its operation.

  • Power Measurement

    It allows you to see in real time how much electricity your connected device is consuming and to keep a usage history, through your smartphone and the compatible app.
  • Smart Ecosystem SmartThings
  • See all
Review the product
Product report

Description

Description

The SHELLY Wave 2PM lighting switch enables control of lighting and electrical appliances using Z-Wave Long Range technology. It features two independent channels, each with a load capacity of up to 10 A (up to 16 A in total), making it easy to manage two devices or circuits simultaneously.

  • Built-in energy metering function for monitoring power consumption for each channel separately.
  • Reliable communication over distances greater than 1 km with support for Z-Wave Long Range technology.
  • Compatibility with the Z-Wave Plus standard and support for 864 MHz and 868.4 MHz frequencies.
  • SmartStart function for easy setup by scanning a QR code.
  • High security levels through AES-128 encryption and S2 certification.

The device consumes less than 0.3 W of power and is designed for integration into an existing smart home system, requiring a compatible hub for setup.

Manufacturer: Shelly

Model: Wave 2PM EU LR

Power supply: 110–240 V ~ / 24 V ⎓ ± 10%

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
091144

Specifications

Switch Type
Smart Switch
Usage
Lighting

Usage

Lighting

For remote control of lamps and lighting fixtures.

Smart Attributes

Smart Ecosystem
SmartThings
Connectivity
Z-Wave

Connectivity

Z-Wave

Reliable wireless connectivity technology with zero interference.

Additional Features

With Remote Control
No

With Remote Control

It allows you to control the switch remotely with a remote control, without needing your smartphone.
Maximum Load
10 A

Maximum Load

It is the maximum amount of current that the switch can withstand without burning out. It shows you how many or how powerful devices you can connect: for simple lights, 10A is enough, while for power-hungry devices (such as a water heater) more Amperes are required.

For example, a typical LED bulb (e.g. 10W) draws very little current, about 0.04 Amperes. This means that a standard smart switch of 10A is more than sufficient for its operation.
Wiring
-
Compatible Application
Shelly Smart Control

Compatible Application

The compatible app that you download to your mobile phone to control the switch remotely.
Pieces
1

Features

Dimmer
No

Dimmer

It allows you to adjust the brightness of the lighting instead of simple on/off operation. Bulbs that support dimmable function are required.
Dry Contact
No

Dry Contact

Dry Contact. It gives you the ability to safely control devices that have their own power supply. It does not transfer current but allows you to control them remotely, without causing a short circuit or damage.
Consumption Measurement
Yes

Consumption Measurement

It allows you to see in real time how much electricity your connected device is consuming and to keep a usage history, through your smartphone and the compatible app.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The SHELLY Wave 2PM lighting switch enables control of lighting and electrical appliances using Z-Wave Long Range technology. It features two independent channels, each with a load capacity of up to 10 A (up to 16 A in total), making it easy to manage two devices or circuits simultaneously.

  • Built-in energy metering function for monitoring power consumption for each channel separately.
  • Reliable communication over distances greater than 1 km with support for Z-Wave Long Range technology.
  • Compatibility with the Z-Wave Plus standard and support for 864 MHz and 868.4 MHz frequencies.
  • SmartStart function for easy setup by scanning a QR code.
  • High security levels through AES-128 encryption and S2 certification.

The device consumes less than 0.3 W of power and is designed for integration into an existing smart home system, requiring a compatible hub for setup.

Manufacturer: Shelly

Model: Wave 2PM EU LR

Power supply: 110–240 V ~ / 24 V ⎓ ± 10%

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
091144

Specifications

Switch Type
Smart Switch
Usage
Lighting

Usage

Lighting

For remote control of lamps and lighting fixtures.

Smart Attributes

Smart Ecosystem
SmartThings
Connectivity
Z-Wave

Connectivity

Z-Wave

Reliable wireless connectivity technology with zero interference.

Additional Features

With Remote Control
No

With Remote Control

It allows you to control the switch remotely with a remote control, without needing your smartphone.
Maximum Load
10 A

Maximum Load

It is the maximum amount of current that the switch can withstand without burning out. It shows you how many or how powerful devices you can connect: for simple lights, 10A is enough, while for power-hungry devices (such as a water heater) more Amperes are required.

For example, a typical LED bulb (e.g. 10W) draws very little current, about 0.04 Amperes. This means that a standard smart switch of 10A is more than sufficient for its operation.
Wiring
-
Compatible Application
Shelly Smart Control

Compatible Application

The compatible app that you download to your mobile phone to control the switch remotely.
Pieces
1

Features

Dimmer
No

Dimmer

It allows you to adjust the brightness of the lighting instead of simple on/off operation. Bulbs that support dimmable function are required.
Dry Contact
No

Dry Contact

Dry Contact. It gives you the ability to safely control devices that have their own power supply. It does not transfer current but allows you to control them remotely, without causing a short circuit or damage.
Consumption Measurement
Yes

Consumption Measurement

It allows you to see in real time how much electricity your connected device is consuming and to keep a usage history, through your smartphone and the compatible app.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

46,94 €
14,00 €   shipping cost