The WYBOT B1 enables thorough cleaning of the entire pool, covering the bottom, walls, and waterline. The side brushes effectively remove debris along edges and in corners, allowing the robot to reach areas that are often inaccessible to standard cleaning systems. Added to this are the optimized cleaning paths that ensure the device does not miss any area. All of this helps reduce the need for additional manual work.

The Triple Drive Motors system and the four-roller design were developed to ensure smooth movement throughout the pool. The robot effectively bypasses obstacles such as drains, steps, and slopes (up to 15°), minimizing the risk of getting stuck during operation. This allows it to efficiently complete the scheduled cleaning cycle without constant user supervision.

The robot is controlled via the WYBOT app. From the app, you can choose between various operating modes, such as cleaning the entire pool, the floor and then the walls, only the floor, or only the walls. You also have access to 3 cleaning routes and the ability to create schedules (up to 4 cycles per week). In addition, the “Quick Clean” option is available, which offers a fast cleaning ideal for daily pool maintenance. The robot also supports OTA updates, allowing you to expand its functions.

The built-in 2600 mAh battery provides up to 120 minutes of continuous operation, allowing you to clean pools with an area of up to 110 m² on a single charge. A full recharge takes about 3 hours, so the device is quickly ready for the next cleaning cycle.

The robot weighs only 6.5 kg, making it easy and effortless to remove from the pool. The automatic recharging function makes it easy to locate the device when it needs charging, while the clear LED indicators show its current status.

The WYBOT B1 works well in pools of various shapes, including rectangular, round, kidney-shaped, and irregular. It also supports a variety of pool surfaces, such as vinyl, concrete, fiberglass, and tile. It can also operate in above-ground and in-ground pools with a maximum depth of 3 meters, as well as in pools with flat bottoms or slopes of up to 15°.

• Type: Cordless
• Operating temperature: 5°C to 35°C
• Cleaning range: Floor, walls, and waterline
• Operating time: Up to approximately 120 minutes
• Recommended pool surface area: Up to 110 m²
• Pool type: Above-ground and in-ground
• Pool surfaces: All surfaces
• Pool shape: All shapes with a flat bottom (slope <15°)
• Waterproof rating: IPX8
• Maximum water depth: 3 m
• Waterline cleaning
• Cleaning brush type: Front high-speed brush
• Filter: One large 180 μm filter cartridge
• Motors: Triple motor
• Suction capacity: 2113 GPH
• Cleaning modes: 5
• Battery type: Lithium-ion battery
• Battery capacity: 2600 mAh
• Maximum charging voltage: 21.6 V
• Input voltage: 100–240 V AC, 50–60 Hz
• Ambient temperature during charging: 0°C to 35°C
• Operating temperature: 5°C to 35°C
• Charging time: Approximately 3 hours
• Output voltage: 25.2 V, 1 A
• Power: 35 W
• Robot weight: 6.5 kg
• App / remote control: Bluetooth / app
• App name: WYBOT APP

• WYBOT B1 pool cleaning robot x1
• 180 μm filter x1
• Charger x1
• Robot retrieval hook x1
• User manual x1
• Quick start guide x1
• Floating elements x10