Craft Adhesives

Lepro Stickers Adhesive 50 gr Grey

HYSOFIX 706 Cyanoacrylate Adhesive - 50g

HYSOFIX 706 is a new generation adhesive with triple distillation. It is an adhesive based on a modified methyl cyanoacrylate compound, designed for bonding a...

HYSOFIX 706 Cyanoacrylate Adhesive - 50g

HYSOFIX 706 is a new generation adhesive with triple distillation. It is an adhesive based on a modified methyl cyanoacrylate compound, designed for bonding a wide range of materials: metals, wood, porcelain, glass, ceramics, rubber, PVC (for bonding tarpaulins, banners) and other plastics, as well as combinations of...

See Description & Specifications See Description & Specifications
The product is not available for shipping to the selected country.

Description & Specifications

HYSOFIX 706 Cyanoacrylate Adhesive - 50g

HYSOFIX 706 is a new generation adhesive with triple distillation. It is an adhesive based on a modified methyl cyanoacrylate compound, designed for bonding a wide range of materials: metals, wood, porcelain, glass, ceramics, rubber, PVC (for bonding tarpaulins, banners) and other plastics, as well as combinations of these materials. The adhesive is suitable for bonding small parts and demonstrates good fatigue resistance, very high compressive and tensile strength.

Instructions for use: The parts to be bonded should be joined quickly, as the adhesive's working time is very short. Ambient moisture is generally sufficient to start curing within a few seconds and to achieve handling strength (full mechanical and chemical strength is achieved after 24 hours). The best results are achieved at relative humidity of 40-60%. To accelerate polymerization and curing, activators should be used. The curing speed is significantly affected by the bond gap size (the larger the gap, the slower the adhesive sets) and the type of materials being bonded.

Curing time:

  • Chloroprene and nitrile rubber: 5...15 seconds
  • Natural rubber: 2...5 seconds
  • EPDM:
  • PVC plastics: 2...10 seconds
  • Phenolic resins: 5...15 seconds
  • ABS polymers: 2...6 seconds
  • Metals (Steel, Aluminum, Zinc): 6...30 seconds

Physical properties:

  • Color: transparent
  • Viscosity: 20..40 [mPa·s]
  • Density: 1.05 [g/cm³] (25°C)
  • Maximum gap filling: 0.05 [mm]
  • Flash point (ISO 2592): 85°C
  • Shelf life: 12 months at 10°C
  • Bonding speed with activator: 5..40 seconds
  • Bonding speed without activator: 5..40 seconds

Adhesive properties:

  • Tensile strength: 5..26 [N/mm²]
  • Compressive strength: 11..19 [N/mm²]
  • Impact strength: 15...20 [N·mm/mm²]
  • Maximum operating temperature: -50°C to +80°C
  • Softening temperature: 160°C ... 170°C
  • Electrical resistance: > 10 [Ω·mm]
  • Dielectric strength: 25 [kV/mm]

Manufacturer

Specifications

Use
Metal, Porcelain, Glass, Rubber
Type
Stickers
No Solvents
No

Quantity

Weight
50 gr
Capacity
-
Quantity
1 pcs

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.