Skroutz.mt

Voltage Tester YT-28330 AC/DC CAT III with Measurement Range 6 - 1000V
Voltage Testers

Voltage Tester YT-28330 AC/DC CAT III with Measurement Range 6 - 1000V

The YATO YT-28330 two-pole voltage tester measures AC and DC voltage from 6 to 1000 V. It features an LCD and LED indicators, while the RCD test and phase sequence check functions support electrical...

The YATO YT-28330 two-pole voltage tester measures AC and DC voltage from 6 to 1000 V. It features an LCD and LED indicators, while the RCD test and phase sequence check functions support electrical installation diagnostics.

It also checks circuit continuity, resistance and polarity. Its low impedance of approximately 7 kΩ helps limit ghost voltages, while...

See Description & Specifications See Description & Specifications

Learn more about invoicing
Review the product
Product report

Description & Specifications

The YATO YT-28330 two-pole voltage tester measures AC and DC voltage from 6 to 1000 V. It features an LCD and LED indicators, while the RCD test and phase sequence check functions support electrical installation diagnostics.

It also checks circuit continuity, resistance and polarity. Its low impedance of approximately 7 kΩ helps limit ghost voltages, while the built-in LED flashlight illuminates the measurement point.

  • Type: Two-pole voltage tester
  • AC/DC voltage: 6–1000 V
  • Display: LCD, maximum reading 1999 and resolution 1 V
  • LED indicators: 12, 24, 50, 120, 230, 400, 690 and 1000 V AC/DC
  • Functions: RCD test, phase sequence check, circuit continuity, resistance and polarity
  • RCD test: Approximately 30 mA at 230 V
  • Resistance: 0–1999 Ω
  • Frequency: 50–400 Hz
  • Continuity test range: 0–400 MΩ
  • Measurement accuracy: ±(3% + 5)
  • Low impedance: Approximately 7 kΩ
  • Automatic measurement range: Yes
  • Reading hold: Yes
  • Audible indication: Yes
  • Lighting: Built-in LED flashlight
  • Safety category: CAT III 1000 V / CAT IV 600 V
  • Protection rating: IP64
  • Power supply: 2 × 1.5 V AAA batteries
  • Operating temperature: -10 to +50 °C
  • Operating relative humidity: <85% RH
  • Storage temperature: -10 to +50 °C
  • Dimensions: 280 × 74 × 34 mm
  • Weight: 285 g

Manufacturer

OEM

Manufacturer Details

Warnings & Safety Information
Type of Current
AC/DC
Min Voltage
6 V
Max Voltage
1000 V
NCV
No
with Buzzer
No
Safety Category
CAT III

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

68,04 €
14,00 €   shipping cost