The DeskAir PRO 48W Built-in Nail Dust Extraction System - LUXORISE in white is specially designed to effectively capture and collect dust particles generated during the filing process of gel, polygel, or semi-permanent nail polish layers. With its built-in design, the device can be perfectly installed inside the manicure table, providing fast and efficient suction of residue during filing, while keeping the workspace clean and hygienic.

Specifications:

• Power: 48W
• Rotational speed: 3500 RPM
• Voltage: 220-240V 50Hz
• Material: ABS, Metal
• Dimensions: 28 x 23.5 x 5.5 cm
• Weight: 862 g

The package includes:

• 1 x Built-in nail dust extraction system
• 1 x User manual
• 1 x Charger

Instructions for use:

• Integrate the suction system into the work table and connect it to the power outlet using the included charger.
• Place the filter in the designated position.
• The speed control switch also works as the ON/OFF button. Turn it clockwise to turn on the device (a click sound will be heard) and set the desired speed.
• When the filter is removed, the fan will stop automatically.
• For best performance, it is recommended to clean the filter after 2-3 manicures. Cleaning can be done by shaking it or using a hair dryer (on cold air). Using water is not recommended as it may damage the filter.

The installation instructions for the manicure table include:

• Cut the table to the appropriate dimensions. Measure carefully before cutting!
• The device must be installed from top to bottom, tilted at a 45° angle with the control panel facing downward.

Cleaning instructions:

• It is recommended to clean the filter after 2-3 manicures. Use a soft brush on the filter surface or a hair dryer (on cold air) to blow from behind the filter. Using water is not recommended due to possible damage.
• Replace the filter with a new one when the suction flow decreases (approximately every 3 months, depending on usage frequency).