Technical Sprays

• Base: Polyurethane
• Consistency: Stable foam (after curing)
• Color: Light green
• Curing system: Chemical reaction
• Cutting time: Approximately 20 minutes (at 20°C/65% RH)
• Yield: Approximately 10 liters per 400ml aerosol
• Relative density: Approximately 42 kg/m³ (FEICA TM 1019)
• Sound insulation: Up to 61 dB (EN ISO 717-1)
• Thermal conductivity: 31.9 mW/m.K (FEICA TM 1020)
• Thermal resistance: From -40°C to +90°C (cured foam)
• Application temperature: From +10°C to +30°C
• Water absorption: -
• Dimensional stability: +/- 3% (FEICA TM 1004)
• Compressive strength: > 70 kPa (at 10% deformation EN 826:2013)
• Tensile strength: > 120 kPa (EN 1607:2013)

Description: Two-component polyurethane assembly and sealing foam with excellent adhesion to most building materials and very short curing time (20 minutes). It cures through a chemical reaction (without moisture from the environment). It is widely used in assembly and finishing work due to its excellent filling and insulating capabilities.

Applications:

• Installation of interior door frames without mechanical fasteners
• Sealing during installation of windows and door frames, sills, curtains, stairs, etc.
• Filling and insulating pipe and cable penetrations, central heating and plumbing components
• Filling and sound insulation of partitions, pre-fabricated elements in hollow constructions
• Thermal and acoustic insulation of floors, attics, terraces, air conditioning systems
• Filling gaps in wall and ceiling joints
• Filling closed spaces (without access to moisture)

Not suitable for PE and PP. If in doubt, consult a specialist.

Packaging: 400ml aerosol