Tools dedicated to the quick and safe removal of the shock absorber from the steering knuckle. This shock absorber separator tool carefully opens the knuckle slot so that the shock absorber rod can be removed or installed without striking or damaging the parts.

Applications and compatibility

• Suitable for a wide range of vehicles: Volkswagen, Audi, BMW, Ford, Peugeot, Citroën, as well as other brands with similar shock absorber mounting in the steering knuckle (compact cars, SUVs, light commercial vehicles).
• Useful for: removal/installation of the shock absorber, loosening the socket clips on steering knuckles/hubs, including lower arms where a slotted socket is used.

Main features

• 10 mm hex drive – used exclusively with hand tools; maximum torque 13 Nm (do not use impact tools).
• Premium AISI 1045 medium-carbon steel – high resistance to pressure, wear, and corrosion; long service life.
• Dual profile (thin tip + shoulder) – progressive and controlled opening of the socket, minimizing the risk of cracks in the steering knuckle.
• Compact and precise – allows work in tight spaces without needing to remove the hub from the vehicle.

Approximate dimensions (according to the images)

• Body: ~40 mm length × 25 mm width × 30 mm height
• Large version: ~42 mm length; “level” height ~10 mm
• Screw/drive: 10 mm hex
• Dimensions may vary slightly depending on the batch.

Instructions for use (brief)

• Apply lubricant fluid to the steering knuckle socket and clean the area.
• Insert the thin tip of the tool into the steering knuckle slot.
• Turn with a 10 mm wrench (by hand) until the socket opens slightly.
• Remove or install the shock absorber rod.
• Release the tension and remove the tool.

Important warnings

• Use hand tools only; do not exceed 13 Nm.
• Do not create excessive opening – risk of cracks in the steering knuckle.
• Keep threads clean and slightly lubricated during use.
• Wear gloves and safety glasses.

Package includes

• 1 × Steering Knuckle Socket Separator / Shock Absorber Separator Tool (black finish)

This is a fast, safe, and clean tool for mechanics and DIY enthusiasts, avoiding hammer blows or screwdrivers and reducing the risk of damage to the steering knuckle and shock absorber.