Skroutz.mt

Flex DGE 25 18.0-EC C Straight Sander 18V 1x5Ah with Speed Setting
Sanders

Flex DGE 25 18.0-EC C Straight Sander 18V 1x5Ah with Speed Setting

Key features:

  • 4 speed settings
  • Maximum overload protection
  • Tool holder up to 8 mm
See full description
  • Number of Batteries 1
  • Ah 5 Ah

  • Speed Setting

    Ability to control the rotation speed of the tool.

    1

  • Eccentricity

    Refers to the distance traveled by the rotation of the base/disc from its center (small eccentricity for finishing, large for fast removal).

    6

    Fast material removal, more aggressive sanding.

  • RPM (Revolutions Per Minute)

    • High speeds → fast material removal
    • Low speeds → finer, more controlled finish
  • Reception Diameter 6 mm
  • Weight (Net) 1500 gr
  • See all
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

At a glance

  • 4 speed settings: Ability to select the appropriate speed for optimal control and precision depending on the material.
  • Tool holder up to 8 mm: Flexibility to use different accessories thanks to the 6 mm, 6.35 mm, and 8 mm collets.
  • Maximum overload protection: Built-in electronic protection to prevent damage and ensure the tool's long service life.

Absolute Control and Flexibility

You adjust the working speed with absolute precision thanks to the four speed settings, from 10,000 to 25,000 min⁻¹. This feature allows you to easily switch from fine finishing to aggressive material removal, always maintaining full control of your sander, regardless of the hardness or sensitivity of the surface you are working on.

Ergonomics and Safety in Every Use

Designed with your comfort in mind, the grinder weighs just 1.5 kg (without battery), allowing you to maneuver effortlessly even in the most hard-to-reach areas. The advanced electronic overload protection systems and soft start safeguard both you and the tool, offering a fully controlled and safe user experience.

Specifications

  • Rated voltage: 18 V
  • Weight without battery: 1.5 kg
  • Tool holder: 6 mm | 6.35 mm | 8 mm
  • Maximum sanding width: 50 mm
  • Maximum accessory diameter: 32 mm
  • No-load speed: 10,000 min⁻¹ | 15,000 min⁻¹ | 20,000 min⁻¹ | 25,000 min⁻¹

Package Contents

  • FLEX DGE 25 18.0-EC C cordless straight grinder
  • 1x 3.0 A charger
  • 1x 5.0 Ah battery

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Specifications

Type
Straight Sander

Type

Straight Sander
For smoothing in hard-to-reach areas with a rotary grinding head.
Power Source
Battery

Power Source

The method of supplying power to the tool.
Eccentricity
6 mm

Eccentricity: 6

Refers to the distance traveled by the rotation of the base/disc from its center (small eccentricity for finishing, large for fast removal).


Fast material removal, more aggressive sanding.
Socket Diameter
6 mm
Net Weight
1500 gr
Weight (with Battery)
1500 gr
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Battery Specifications

Number of Batteries
1
Volt
18 V
Ah
5 Ah

Features & Functions

Dust Suction System
No

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
Yes

Speed Setting

Ability to control the rotation speed of the tool.
Turns
25000 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
No

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
No

Sandpaper / Belt Specifications

Diameter
50 mm
Sand Belt Width (min)
32 mm
Sand Belt Width (max)
32 mm
Velcro
No

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Without
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

At a glance

  • 4 speed settings: Ability to select the appropriate speed for optimal control and precision depending on the material.
  • Tool holder up to 8 mm: Flexibility to use different accessories thanks to the 6 mm, 6.35 mm, and 8 mm collets.
  • Maximum overload protection: Built-in electronic protection to prevent damage and ensure the tool's long service life.

Absolute Control and Flexibility

You adjust the working speed with absolute precision thanks to the four speed settings, from 10,000 to 25,000 min⁻¹. This feature allows you to easily switch from fine finishing to aggressive material removal, always maintaining full control of your sander, regardless of the hardness or sensitivity of the surface you are working on.

Ergonomics and Safety in Every Use

Designed with your comfort in mind, the grinder weighs just 1.5 kg (without battery), allowing you to maneuver effortlessly even in the most hard-to-reach areas. The advanced electronic overload protection systems and soft start safeguard both you and the tool, offering a fully controlled and safe user experience.

Specifications

  • Rated voltage: 18 V
  • Weight without battery: 1.5 kg
  • Tool holder: 6 mm | 6.35 mm | 8 mm
  • Maximum sanding width: 50 mm
  • Maximum accessory diameter: 32 mm
  • No-load speed: 10,000 min⁻¹ | 15,000 min⁻¹ | 20,000 min⁻¹ | 25,000 min⁻¹

Package Contents

  • FLEX DGE 25 18.0-EC C cordless straight grinder
  • 1x 3.0 A charger
  • 1x 5.0 Ah battery

Manufacturer

Manufacturer Details

Warnings & Safety Information

Specifications

Type
Straight Sander

Type

Straight Sander
For smoothing in hard-to-reach areas with a rotary grinding head.
Power Source
Battery

Power Source

The method of supplying power to the tool.
Eccentricity
6 mm

Eccentricity: 6

Refers to the distance traveled by the rotation of the base/disc from its center (small eccentricity for finishing, large for fast removal).


Fast material removal, more aggressive sanding.
Socket Diameter
6 mm
Net Weight
1500 gr
Weight (with Battery)
1500 gr
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Battery Specifications

Number of Batteries
1
Volt
18 V
Ah
5 Ah

Features & Functions

Dust Suction System
No

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
Yes

Speed Setting

Ability to control the rotation speed of the tool.
Turns
25000 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
No

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
No

Sandpaper / Belt Specifications

Diameter
50 mm
Sand Belt Width (min)
32 mm
Sand Belt Width (max)
32 mm
Velcro
No

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Without
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.