Follow the instructions below for better results with semi-permanent nail polishes:

1. Apply a thin layer of Dehydrator and wait for 1 minute until it dries (do not cure).
2. Apply a thin layer of Primer and wait for 1 minute until it dries (do not cure).
3. Continue with a thin layer of base coat and cure.
4. Continue with a thin layer of the color of your choice and cure.
5. Repeat a thin layer of the color and cure again.
6. If nails are brittle or very thin, apply a layer of Reinforce Gel and cure.
7. Finish with the Top Coat of your choice, applying a normal layer and cure.

Curing times:

• UV Lamp 36W: 120 seconds
• LED Lamp 24W: 120 seconds
• LED Lamp 48W: 30 seconds

Removal:

1. Lightly file the surface of the nail to remove the Top Coat.
2. Soak a small piece of cotton with pure acetone.
3. Place it on the nail and wrap with aluminum foil.
4. Wait for 5 minutes.
5. Remove the aluminum foils with the cotton and gently remove the polish with the help of a pusher.

Precautions:

• Keep out of reach of children.
• Keep away from sunlight and heat.
• Tightly close the cap after use.
• Follow the usage instructions.
• Discontinue use if sensitivity occurs.