Kraft Floor Shield polyurethane-acrylic paint is a one-component, water-based hybrid paint with nanotechnology, designed for floors. Suitable for interior and exterior smooth cement or concrete surfaces subject to light wear, such as storage areas, home garages, courtyards and paving slabs. It dries and hardens quickly, forming a uniform satin finish.
It offers adhesion and resistance to weather, cleaning products, wear and impact. Apply with a brush or roller in two coats, thinning by 10–15% by volume with water. The surface can be used 48 hours after the paint has dried.
- Type: One-component water-based acrylic-polyurethane paint
- Use: Interior and exterior floors subject to light wear
- Suitable surfaces: Smooth cement and concrete surfaces
- Colour: Grey
- Volume: 10 L
- Gloss level: Satin
- Application method: Brush or roller
- Thinning: 10–15% by volume with water
- Coats: 2
- Recoat time: 5–6 hours
- Surface dry: Approximately 30 minutes at 25 °C and 50% relative humidity
- Time before the painted surface can be used: 48 hours after drying
- Coverage per coat: 10–12 m²/L
- Density: 1.16 g/mL (±0.05) at 25 °C, depending on the substrate and shade
- Solids by weight: 49% (±4)
- Gloss at 60°: 15 GU (±7)
- pH: 9.0 (±0.4)
- Pendulum König hardness: 117 sec (±15) at 7 days
- Recommended dry film thickness: 75 μm (±5) for 2 coats
- Pull-off adhesion: ≥ 1.5 N/mm²
- Capillary water absorption: w < 0.1 kg/m²·h⁰·⁵
- Maximum VOC content of ready-to-use product: 139 g/L
- Certifications: EN 1504-2 and EN 13813
Specifications
- Type
- Polyurethane Paint
- Colour
- Grey
- Acrilyc
- Yes
- Luminosity
- Satine
Quantity
- Volume
- 10 lt
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.