BOLL BODY PROTECTION AGENT SPRAY
Cat. No.: 001006
Size: 500 ml
The body protection agent is a product based on synthetic resins. It creates a flexible finish that perfectly protects against stone chips and mechanical stress. It is used to protect sills, bumpers, spoilers, and other parts of the car body.
The product has very high wear resistance (resistance to stone impacts). It can be painted with all paint systems.
Instructions for use:
- Clean and degrease thoroughly, then dry the surfaces to be coated. Cover adjacent surfaces with paper.
- Shake the can well for about 3 minutes before use.
- When applying, keep the can 15-20 cm from the surface to be coated.
- After use, turn the can upside down and spray until the valve is empty.
Optimal coating thickness: approximately 1 mm. Do not spray on parts of the exhaust system, engine, gearbox, or suspension elements.
The surface can be painted after approximately 3 hours. For water-based paints – after approximately 24 hours.
Physical properties:
- Color: black
- Density (at 20°C): 0.805 g/cm³
- Flash point: 200°C
- Boiling point: -44°C
- Self-ignition: does not self-ignite
- Explosion limits: upper: 11.5% vol. / lower: 0.8% vol.
Specifications
- Type
- Spray
- Usage
- Protection
Quantity
- Capacity
- 500 ml
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.