Current measurement CAT III 600V AC/DC up to 600 A without interrupting the line. Current clamp opening: 31 mm. Zeroing function for power supply.

Suitable for automotive workshops, electrical panels, as well as for high-current measurements in cars and trucks. With an extended voltage measurement range up to 600 V and true RMS measurement, it can handle professional work reliably and safely.

Multimeter functions: DMM measures voltage, frequency, capacitance, continuity, resistance, and temperature with automatic range selection. The non-contact voltage tester (NCV) allows contactless testing.

LowZ and LPF: Low input impedance prevents false readings. Low-pass filter (LPF) for accurate frequency signal measurement when measuring motors and transformers.

Safety standard: IEC 61010-1, CAT III 600 V. Double insulation.

Press the "Z / F" button to switch to AC current measurement.

• When the current is > 3A, the orange indicator will light up.
• AC current measurement range: 60A / 600A. Accuracy: ± (2.5% + 5).

Note: To measure current, the multimeter clamp must be attached to a single wire, not to the entire power line. The power cable includes two power wires and one ground wire. The current in the two wires always flows in opposite directions, and the magnetic fields cancel out, so the measuring device shows 0A. Clamp the single conductor to be measured and close the current clamp. The conductor being measured must be placed in the center of the terminal; otherwise, additional errors may occur.