Skroutz.mt

Absorption Mechanism 60cm Black
Vent Hoods

Absorption Mechanism 60cm Black Code: DBB63BC60

Key features:

  • Energy Class: D
  • Extraction Capacity (Max): 384 m³/h
  • Noise Level: 65 dB

Discover the Bosch built-in cooker hood with a smart T-shape design, 20 kg capacity, a dual Clean Air system, and flush mounting.

See full description

Top specs

  • Item

    Absorption Mechanism

    "They are built-in hoods that are installed in cabinets and only the bottom surface of the hood is visible, additionally they do not have sliding filters."

  • Noise Level

    Shows how much noise the extractor makes when it is in operation.

    2. The fewer the db, the quieter it is. An extractor with 58db or less is considered quite quiet.

  • Energy class

    The energy class categorizes devices into groups according to the current they consume, ranging from the lowest D to the highest A+++.

    2. The higher the energy class, the lower the electricity consumption.

    3. For example, for a 12 sq.m. kitchen with an extractor fan that has an absorption power of about 340m³/h and frequent weekly use, the difference in annual cost from D to A is about €6, and from A to A+++ the difference is almost negligible.

  • Extraction Power (Max)

    Displays the maximum absorption capacity. To calculate the required absorbency, knowledge of the dimensions of the kitchen space is necessary.


    For example, for a 7 sqm kitchen, the required absorption power is approximately 200m³/h, for 12 sqm it is approximately 340m³/h, and for 15 sqm it is 420m³/h and above.

  • Filter Type

    Charcoal (optional)

    Carbon filters are used when range hoods operate without a duct connection and the air is recirculated into the room.


    They are not washable and it is recommended to replace them every 4 months.


    Their use reduces the efficiency of the range hood by about 30%.

    Metal

    They are used in most extractors. Metallic filters are easy to remove and clean, either in the dishwasher or by hand. They do not require frequent replacement.
  • See all

Learn more about invoicing
Review the product
Product report

Description

Description

At a glance

The Bosch built-in cooker hood combines seamless aesthetic integration with smart functionality for your kitchen. 

✔ Thanks to its innovative T-shaped design, you gain extra storage space in your cabinet, with a load capacity of up to 20 kg (10 kg on each side). 

✔ Flush-mounted installation allows the appliance to blend in completely and become almost invisible. 

✔ Adjust the settings in an instant using the practical Push button control. 

✔ The advanced Dual filtration system with a Long-life Clean Air filter neutralizes even the strongest odors, such as fried fish. 

✔ It is easy for one person to install, while its impressive Matte design resists fingerprints.

Extra storage space up to 20 kg

Make the most of every inch of your kitchen without sacrificing fresh air! Thanks to its clever T-shaped design, this extractor hood gives you extra storage space inside the cabinet and can support up to 20 kg (10 kg on each side). Now you can keep your favorite jars, spices, or cooking accessories within easy reach, while keeping your kitchen perfectly organized and functional!

Invisible integration with flush-mounted installation

Do you love clean, minimalist lines in your space? The advanced flush-mounted installation allows the hood to sit flush with the upper cabinet, creating a seamless integration that is sure to impress. Say goodbye to bulky appliances and welcome a sleek, almost invisible solution that delivers incredible extraction power without disrupting your home’s aesthetic.

Convenient Push-Button Control for Focused Cooking

Focus completely on creating your most delicious recipes! With convenient push-button controls, you can adjust your appliance’s settings with a simple touch, without taking your eyes off the food simmering away. It’s the most practical and immediate way to control the extraction power, while Bosch keeps your kitchen air spotlessly clean and fresh.

Dual filtration and Clean Air filter with a 4-year lifespan

Enjoy ultimate freshness, even in recirculation mode! The dual filtration system uses a metal grease filter and an innovative activated-carbon Long-life Clean Air filter to tackle the most stubborn odours, such as those from fried fish. Best of all, you can regenerate it in the oven (at 100 °C for 3 hours) up to 3 times, extending its lifespan to up to 4 years for maximum savings!

Easy one-person installation and flexibility

Forget complicated installation processes and large installation crews! This built-in cooker hood is specially designed for easy installation by one person, offering a wide range of flexible mounting options. It is the ideal replacement for old built-in or telescopic cooker hoods, while the optional chimney extension fits cabinets up to 90 cm high, concealing all technical details.

Modern Matte Design That Resists Fingerprints

Upgrade the look of your kitchen with the stunning Matte Design in a matte black finish. Even when you open the cabinet, the appliance retains a sleek, minimalist look that blends harmoniously with its surroundings. What’s more, the special matte surface noticeably reduces the appearance of fingerprints and stains, making cleaning a breeze and keeping your kitchen spotless at all times.

Why choose it?

• Smart T-shape design provides extra cabinet storage space for up to 20 kg

• Seamless flush-mounted installation for a perfectly integrated, elegant look

• Dual filtration system with a metal filter and activated carbon

• Regenerable Long-life Clean Air filter lasts up to 4 years, offering great savings

• Easy one-person installation with flexible fitting options for cabinets up to 90 cm

• Practical push-button controls for quick, safe operation while cooking

• Striking matte design resists fingerprints and is exceptionally easy to clean

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
DBB63BC60

Product Details

Type
Absorption Mechanism

Type

Absorption Mechanism
"They are built-in hoods that are installed in cabinets and only the bottom surface of the hood is visible, additionally they do not have sliding filters."
Retro
No
Grease Filter Material
Charcoal (optional), Metal

Grease Filter Material

Charcoal (optional)

Carbon filters are used when range hoods operate without a duct connection and the air is recirculated into the room.


They are not washable and it is recommended to replace them every 4 months.


Their use reduces the efficiency of the range hood by about 30%.

Metal

They are used in most extractors. Metallic filters are easy to remove and clean, either in the dishwasher or by hand. They do not require frequent replacement.
Extraction Mode
Extraction or Recirculation

Extraction Mode

Concerns the way in which the extractor absorbs air.

Extraction or Recirculation

The extractor fan has both functions. The air that the extractor fan draws can either be extracted through a pipe or recycled back into the fan. For air extraction function, a pipe is needed to remove the air outside the kitchen.
Dual Motor
No
Type of Control
Switches
Timer Function
No
Filter Cleaning Indicator
No
Washable Filter
No
Colour
Black

Technical Features

Extraction Power (Max)
384 m³/h

Extraction Power (Max)

Displays the maximum absorption capacity. To calculate the required absorbency, knowledge of the dimensions of the kitchen space is necessary.


For example, for a 7 sqm kitchen, the required absorption power is approximately 200m³/h, for 12 sqm it is approximately 340m³/h, and for 15 sqm it is 420m³/h and above.

Dimensions

Width
60 cm

Energy Label

Energy Class
D

Energy Class

The energy class categorizes devices into groups according to the current they consume, ranging from the lowest D to the highest A+++.

2. The higher the energy class, the lower the electricity consumption.

3. For example, for a 12 sq.m. kitchen with an extractor fan that has an absorption power of about 340m³/h and frequent weekly use, the difference in annual cost from D to A is about €6, and from A to A+++ the difference is almost negligible.
Average Energy Consumption per Year
56 kWh/y
Extraction Flow Efficiency
E

Extraction Flow Efficiency

Expresses how effective the extractor is in absorbing odors. 2. The performance scale starts at G for less efficient extractors and goes up to A for more efficient ones. 3. Typically, a rating of D and above is a good performance for effectively absorbing odors from cooking.
Lighting Efficiency
A

Lighting Efficiency

Expresses the intensity of the hood's lighting. The scale starts from G for the lowest performance where the lighting is quite soft, up to A for the highest performance where the lighting is more intense. It is usually recommended to have a lighting performance index of C or higher to facilitate cooking with more intense lighting.
Fat Retention Efficiency
B

Fat Retention Efficiency

Shows how effectively the filters of the extractor work in retaining fat. 


The scale starts from G for the lowest performance, up to A for the highest performance. 


A performance rating of C and above is considered satisfactory for fat retention during cooking.
Noise Level
65 dB

Noise Level

Shows how much noise the extractor makes when it is in operation.

2. The fewer the db, the quieter it is. An extractor with 58db or less is considered quite quiet.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

At a glance

The Bosch built-in cooker hood combines seamless aesthetic integration with smart functionality for your kitchen. 

✔ Thanks to its innovative T-shaped design, you gain extra storage space in your cabinet, with a load capacity of up to 20 kg (10 kg on each side). 

✔ Flush-mounted installation allows the appliance to blend in completely and become almost invisible. 

✔ Adjust the settings in an instant using the practical Push button control. 

✔ The advanced Dual filtration system with a Long-life Clean Air filter neutralizes even the strongest odors, such as fried fish. 

✔ It is easy for one person to install, while its impressive Matte design resists fingerprints.

Extra storage space up to 20 kg

Make the most of every inch of your kitchen without sacrificing fresh air! Thanks to its clever T-shaped design, this extractor hood gives you extra storage space inside the cabinet and can support up to 20 kg (10 kg on each side). Now you can keep your favorite jars, spices, or cooking accessories within easy reach, while keeping your kitchen perfectly organized and functional!

Invisible integration with flush-mounted installation

Do you love clean, minimalist lines in your space? The advanced flush-mounted installation allows the hood to sit flush with the upper cabinet, creating a seamless integration that is sure to impress. Say goodbye to bulky appliances and welcome a sleek, almost invisible solution that delivers incredible extraction power without disrupting your home’s aesthetic.

Convenient Push-Button Control for Focused Cooking

Focus completely on creating your most delicious recipes! With convenient push-button controls, you can adjust your appliance’s settings with a simple touch, without taking your eyes off the food simmering away. It’s the most practical and immediate way to control the extraction power, while Bosch keeps your kitchen air spotlessly clean and fresh.

Dual filtration and Clean Air filter with a 4-year lifespan

Enjoy ultimate freshness, even in recirculation mode! The dual filtration system uses a metal grease filter and an innovative activated-carbon Long-life Clean Air filter to tackle the most stubborn odours, such as those from fried fish. Best of all, you can regenerate it in the oven (at 100 °C for 3 hours) up to 3 times, extending its lifespan to up to 4 years for maximum savings!

Easy one-person installation and flexibility

Forget complicated installation processes and large installation crews! This built-in cooker hood is specially designed for easy installation by one person, offering a wide range of flexible mounting options. It is the ideal replacement for old built-in or telescopic cooker hoods, while the optional chimney extension fits cabinets up to 90 cm high, concealing all technical details.

Modern Matte Design That Resists Fingerprints

Upgrade the look of your kitchen with the stunning Matte Design in a matte black finish. Even when you open the cabinet, the appliance retains a sleek, minimalist look that blends harmoniously with its surroundings. What’s more, the special matte surface noticeably reduces the appearance of fingerprints and stains, making cleaning a breeze and keeping your kitchen spotless at all times.

Why choose it?

• Smart T-shape design provides extra cabinet storage space for up to 20 kg

• Seamless flush-mounted installation for a perfectly integrated, elegant look

• Dual filtration system with a metal filter and activated carbon

• Regenerable Long-life Clean Air filter lasts up to 4 years, offering great savings

• Easy one-person installation with flexible fitting options for cabinets up to 90 cm

• Practical push-button controls for quick, safe operation while cooking

• Striking matte design resists fingerprints and is exceptionally easy to clean

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
DBB63BC60

Product Details

Type
Absorption Mechanism

Type

Absorption Mechanism
"They are built-in hoods that are installed in cabinets and only the bottom surface of the hood is visible, additionally they do not have sliding filters."
Retro
No
Grease Filter Material
Charcoal (optional), Metal

Grease Filter Material

Charcoal (optional)

Carbon filters are used when range hoods operate without a duct connection and the air is recirculated into the room.


They are not washable and it is recommended to replace them every 4 months.


Their use reduces the efficiency of the range hood by about 30%.

Metal

They are used in most extractors. Metallic filters are easy to remove and clean, either in the dishwasher or by hand. They do not require frequent replacement.
Extraction Mode
Extraction or Recirculation

Extraction Mode

Concerns the way in which the extractor absorbs air.

Extraction or Recirculation

The extractor fan has both functions. The air that the extractor fan draws can either be extracted through a pipe or recycled back into the fan. For air extraction function, a pipe is needed to remove the air outside the kitchen.
Dual Motor
No
Type of Control
Switches
Timer Function
No
Filter Cleaning Indicator
No
Washable Filter
No
Colour
Black

Technical Features

Extraction Power (Max)
384 m³/h

Extraction Power (Max)

Displays the maximum absorption capacity. To calculate the required absorbency, knowledge of the dimensions of the kitchen space is necessary.


For example, for a 7 sqm kitchen, the required absorption power is approximately 200m³/h, for 12 sqm it is approximately 340m³/h, and for 15 sqm it is 420m³/h and above.

Dimensions

Width
60 cm

Energy Label

Energy Class
D

Energy Class

The energy class categorizes devices into groups according to the current they consume, ranging from the lowest D to the highest A+++.

2. The higher the energy class, the lower the electricity consumption.

3. For example, for a 12 sq.m. kitchen with an extractor fan that has an absorption power of about 340m³/h and frequent weekly use, the difference in annual cost from D to A is about €6, and from A to A+++ the difference is almost negligible.
Average Energy Consumption per Year
56 kWh/y
Extraction Flow Efficiency
E

Extraction Flow Efficiency

Expresses how effective the extractor is in absorbing odors. 2. The performance scale starts at G for less efficient extractors and goes up to A for more efficient ones. 3. Typically, a rating of D and above is a good performance for effectively absorbing odors from cooking.
Lighting Efficiency
A

Lighting Efficiency

Expresses the intensity of the hood's lighting. The scale starts from G for the lowest performance where the lighting is quite soft, up to A for the highest performance where the lighting is more intense. It is usually recommended to have a lighting performance index of C or higher to facilitate cooking with more intense lighting.
Fat Retention Efficiency
B

Fat Retention Efficiency

Shows how effectively the filters of the extractor work in retaining fat. 


The scale starts from G for the lowest performance, up to A for the highest performance. 


A performance rating of C and above is considered satisfactory for fat retention during cooking.
Noise Level
65 dB

Noise Level

Shows how much noise the extractor makes when it is in operation.

2. The fewer the db, the quieter it is. An extractor with 58db or less is considered quite quiet.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

309,00 €
56,00 €   shipping cost
Bosch