ST10 Start Gypsum Board Filler 2.5 kg

White fine filler with excellent adhesion to substrates. It does not shrink, dries quickly, and does not crack even in thick layers, while being easy to sand. After applying the filler, walls and ceilings acquire a flawless, smooth surface ready for painting.

The mixed filler can be applied "wet on wet," meaning the next layer is applied before the previous one is fully dry, significantly reducing working time.

Advantages and product features

• Quick and easy application.
• Flawless surface – without bubbles and craters.
• Contains microfillers that allow the filler to precisely fill scratches and cracks, creating a perfectly smooth surface ready for painting.
• Dries quickly.
• Increased durability and flexibility.
• Fibers prevent cracking and make the filler structure more flexible.
• Comfortable work – easy sanding.
• Clean processing – limited dust.

Important information

• The substrate to be covered must be firmly bound, dry, free from greasy substances, loose filler grains, dust, and dirt.
• Pour the desired amount of dry filler into a container with water, about 1 kg of dry filler per 0.4 liters of water, stirring continuously.
• "Wet on wet" application – apply another layer under the following conditions: layer thickness 2-3 millimeters; application time – before the first layer is fully dry (about 75% of the surface is dry to touch).
• Smooth dry surfaces with sandpaper or sanding sponge, remove dust, and coat with a 100/150 mesh.
• Coating should be done with a paint roller or spray. The use of a brush may cause cloudiness and surface irregularities.
• When using, wear protective gloves, protective clothing, eye, and face protection.

Parameters:

• Manufacturer: Śnieżka
• Weight: 2.5 kg
• Application method: Metal spatula
• Efficiency: Depends on layer thickness, approximately 1.5 kg/m² with a layer thickness of 1 mm
• Application: For finishing and renovation works indoors, wall smoothing