Skroutz.mt

Vevor Electric Surface Pump with Automatic Suction 1hp Single-Phase
Surface Water Pumps

Vevor Electric Surface Pump with Automatic Suction 1hp Single-Phase Code: GSJBGSWGLQFYTPM50001V2

The Vevor self-priming surface pump is used for pumping water and boosting water pressure in domestic installations and for irrigating gardens and lawns. It has a power rating of 735 W, a horsepower...

The Vevor self-priming surface pump is used for pumping water and boosting water pressure in domestic installations and for irrigating gardens and lawns. It has a power rating of 735 W, a horsepower rating of 1 hp, and a maximum head of 39,624 m. Its maximum flow rate is 3,750 LPH, and its maximum suction depth is 8 m.

The pump has a 19 L pressure tank, a...

See full description See full description

Top specs

  • Power Supply

    Electric

    Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly

  • Self-Priming

    The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
  • Voltage Single-Phase

  • Manometric Height

    This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

  • Pressure

    The unit of measurement for the pressure exerted by the pump on the water (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
  • See all
167 69 €
Delivery Fri, 13 Nov - Thu, 19 Nov
38,00 €   shipping cost
Sent from Greece
From Vevor Hellas
Greece
20+ pieces
See Water Pumps on the page of Vevor Hellas

Learn more about invoicing
Review the product
Product report

Description

Description

The Vevor self-priming surface pump is used for pumping water and boosting water pressure in domestic installations and for irrigating gardens and lawns. It has a power rating of 735 W, a horsepower rating of 1 hp, and a maximum head of 39,624 m. Its maximum flow rate is 3,750 LPH, and its maximum suction depth is 8 m.

The pump has a 19 L pressure tank, a pressure switch that activates at 1.4 bar and deactivates at 2.8 bar, and a pressure gauge for monitoring pressure. The automatic thermal protection shuts down the pump if it overheats, such as when there is a water shortage. It is intended for non-potable water.

  • Power supply: Electric
  • Horsepower: 1 hp
  • Power: 735 W
  • Voltage: Single-phase, 230 V
  • Maximum flow rate: 3,750 LPH
  • Head: 39,624 m
  • Maximum suction depth: 8 m
  • Pressure: 8 bar
  • Priming: Automatic
  • Pressure tank capacity: 19 L
  • Pressure switch: Activates at 1.4 bar and deactivates at 2.8 bar
  • Pressure gauge: Yes
  • Thermal overload protection: Automatic
  • Water type: Non-potable
  • Protection rating: IPX4
  • Seal type: Mechanical seal
  • Connection: G1 in

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
GSJBGSWGLQFYTPM50001V2

Main Specifications

Power Source
Electric

Power Source

Electric
Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
Automatic Suction
Yes

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
No

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Power Type
Single-Phase
Set
No

Technical Specifications

Horsepower
1 hp
Power
735 W
Manometric Head
39.624 m

Manometric Head

This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
Pressure
8 bar

Pressure

The unit of measurement for the pressure exerted by the pump on the water (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Vevor self-priming surface pump is used for pumping water and boosting water pressure in domestic installations and for irrigating gardens and lawns. It has a power rating of 735 W, a horsepower rating of 1 hp, and a maximum head of 39,624 m. Its maximum flow rate is 3,750 LPH, and its maximum suction depth is 8 m.

The pump has a 19 L pressure tank, a pressure switch that activates at 1.4 bar and deactivates at 2.8 bar, and a pressure gauge for monitoring pressure. The automatic thermal protection shuts down the pump if it overheats, such as when there is a water shortage. It is intended for non-potable water.

  • Power supply: Electric
  • Horsepower: 1 hp
  • Power: 735 W
  • Voltage: Single-phase, 230 V
  • Maximum flow rate: 3,750 LPH
  • Head: 39,624 m
  • Maximum suction depth: 8 m
  • Pressure: 8 bar
  • Priming: Automatic
  • Pressure tank capacity: 19 L
  • Pressure switch: Activates at 1.4 bar and deactivates at 2.8 bar
  • Pressure gauge: Yes
  • Thermal overload protection: Automatic
  • Water type: Non-potable
  • Protection rating: IPX4
  • Seal type: Mechanical seal
  • Connection: G1 in

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
GSJBGSWGLQFYTPM50001V2

Main Specifications

Power Source
Electric

Power Source

Electric
Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
Automatic Suction
Yes

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
No

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Power Type
Single-Phase
Set
No

Technical Specifications

Horsepower
1 hp
Power
735 W
Manometric Head
39.624 m

Manometric Head

This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
Pressure
8 bar

Pressure

The unit of measurement for the pressure exerted by the pump on the water (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

167,69 €
38,00 €   shipping cost