Skroutz.mt

BeSafe Flex Fix 2 Car Seat High-Back Booster with Isofix Black Soft Breeze
Baby Car Seats

BeSafe Flex Fix 2 Car Seat High-Back Booster with Isofix Black Soft Breeze Code: 2001-11037469-BSB

The BeSafe Flex FIX 2 is a premium high-back booster car seat, designed for children with a height of 100–150 cm, approximately 4–12 years old. It complies with the UN R129 (i-Size) safety standard...

The BeSafe Flex FIX 2 is a premium high-back booster car seat, designed for children with a height of 100–150 cm, approximately 4–12 years old. It complies with the UN R129 (i-Size) safety standard and is installed forward-facing.

See full description See full description

Top specs

  • Orientation

    This concerns the direction that the seat is facing. It can be either forward or backward. Additionally, some seats have the ability to rotate and have both directions.

    Forward

    The forward-facing seat is usually recommended for children over 2 years old or even earlier depending on the weight of the baby. 2. Forward-facing seats may be booster seats or may not have a belt as the car's belt is used.
  • See all

Learn more about invoicing
Review the product
Product report

Description

Description

The BeSafe Flex FIX 2 is a premium high-back booster car seat, designed for children with a height of 100–150 cm, approximately 4–12 years old. It complies with the UN R129 (i-Size) safety standard and is installed forward-facing.

Protection and safety

  • UN R129 / i-Size, with specifications for child height 100–150 cm.
  • SIP+ for additional protection in side impact collisions.
  • Headrest with Dynamic Force Absorber™ technology, designed to absorb energy in a side impact.
  • PAD+, a soft protector that attaches to the belt and provides extra protection for the neck and chest area.
  • Special guides for the correct positioning of both the diagonal and horizontal parts of the belt.
  • The design without classic armrests reduces the risk of incorrect belt positioning.

Installation


Flex FIX 2 can be installed:

  • with ISOfix + the factory 3-point seat belt, or
  • with the 3-point seat belt of the car only.

The child is secured with the car's seat belt.

Especially practical design

One of the most important advantages of the Flex FIX 2 is its slim profile. The SIP side wings can be removed, reducing the width of the seat and allowing, in a suitable vehicle, the installation of up to three seats in a row.

The headrest is height-adjustable so the seat can "grow" with the child, while it also features two recline positions for greater comfort, especially when the child is sleeping. It also has an integrated carrying handle for easier transport.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
2001-11037469-BSB

General Information

Type
High-back Booster

Type

High-back Booster

High-back booster seat in which the child sits at the correct height, allowing the seatbelt to be properly positioned on the shoulder and thighs to absorb the forces of a collision.
Facing
Forward

Facing

This concerns the direction that the seat is facing. It can be either forward or backward. Additionally, some seats have the ability to rotate and have both directions.

Forward

The forward-facing seat is usually recommended for children over 2 years old or even earlier depending on the weight of the baby. 2. Forward-facing seats may be booster seats or may not have a belt as the car's belt is used.
Number of Belt Anchor Points
-

Number of Belt Anchor Points

Shows how many points the car seat belt fastens.
Seat Weight
-
Colour
Black

Age group

Maximum Child Age
-
Child Height
-

Details

Manufacturer Colour
Black Soft Breeze
Recline
No

Recline

The seat is properly adjusted to have a tilt. The recline helps prevent the child's head from leaning forward when sleeping.

Some models allow for adjustment of the recline when the child is already seated, while others require adjustment before placing the child in the seat.

It is not recommended for newborns as babies should not be lifted more than 30 degrees due to the potential risk of musculoskeletal problems.
Swivel
No

Swivel

The seat has the ability to make a full rotation (360 degrees) for a change of orientation and immediate access to the child.

2. The rotation capability offers comfort and flexibility to the parent as they have easy access to any orientation the seat has.
Top Tether
No

Top Tether

It is an additional restraint strap located on the top or back of the seat, which holds it in place and reduces forward movement of the seat during a frontal collision, providing additional safety in case of an accident.
With Removable Covers
No
with Base
No

Technical Specifications

ADAC Test
Not Available

ADAC Test

ADAC is a company that conducts crash tests and evaluates car seats for safety, ergonomics, functionality, and the presence of harmful substances.
Swedish Plus Test
No

Swedish Plus Test

Considered the strictest crash test worldwide. It focuses on measuring the pressure exerted on the neck, imposing limits that only rear-facing seats can meet.
i-Size
No

i-Size

These are new generation seats that offer additional safety in case of side collision.


i-Size seats are designed according to the height, not the weight of the child, allowing them to travel rear-facing for a longer period of time.


i-Size seats do not replace weight-based car seats but offer an additional option. They are recommended for both newborns and older children.
Side Collision Protection
-

Side Collision Protection

An integrated system on the side of the seat that reduces the impact force of a side collision, protecting the child from serious injury.

Installation

ISOfix
Yes

ISOfix

It is a system for safely installing a child seat. To apply it, it is necessary for the rear seats of the car to have the corresponding metal receptacles, but all modern cars have them.

2. The isofix system is easier to install compared to seats that do not have it. The seat clicks into the car's receptacles and thus reduces the movement of the seat towards the front in the event of a collision.

3. Most seats that apply to all ages have the isofix system.
Seatbelt
Yes

Seatbelt

The car seat can be installed in the car using the vehicle's seat belt.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The BeSafe Flex FIX 2 is a premium high-back booster car seat, designed for children with a height of 100–150 cm, approximately 4–12 years old. It complies with the UN R129 (i-Size) safety standard and is installed forward-facing.

Protection and safety

  • UN R129 / i-Size, with specifications for child height 100–150 cm.
  • SIP+ for additional protection in side impact collisions.
  • Headrest with Dynamic Force Absorber™ technology, designed to absorb energy in a side impact.
  • PAD+, a soft protector that attaches to the belt and provides extra protection for the neck and chest area.
  • Special guides for the correct positioning of both the diagonal and horizontal parts of the belt.
  • The design without classic armrests reduces the risk of incorrect belt positioning.

Installation


Flex FIX 2 can be installed:

  • with ISOfix + the factory 3-point seat belt, or
  • with the 3-point seat belt of the car only.

The child is secured with the car's seat belt.

Especially practical design

One of the most important advantages of the Flex FIX 2 is its slim profile. The SIP side wings can be removed, reducing the width of the seat and allowing, in a suitable vehicle, the installation of up to three seats in a row.

The headrest is height-adjustable so the seat can "grow" with the child, while it also features two recline positions for greater comfort, especially when the child is sleeping. It also has an integrated carrying handle for easier transport.

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
2001-11037469-BSB

General Information

Type
High-back Booster

Type

High-back Booster

High-back booster seat in which the child sits at the correct height, allowing the seatbelt to be properly positioned on the shoulder and thighs to absorb the forces of a collision.
Facing
Forward

Facing

This concerns the direction that the seat is facing. It can be either forward or backward. Additionally, some seats have the ability to rotate and have both directions.

Forward

The forward-facing seat is usually recommended for children over 2 years old or even earlier depending on the weight of the baby. 2. Forward-facing seats may be booster seats or may not have a belt as the car's belt is used.
Number of Belt Anchor Points
-

Number of Belt Anchor Points

Shows how many points the car seat belt fastens.
Seat Weight
-
Colour
Black

Age group

Maximum Child Age
-
Child Height
-

Details

Manufacturer Colour
Black Soft Breeze
Recline
No

Recline

The seat is properly adjusted to have a tilt. The recline helps prevent the child's head from leaning forward when sleeping.

Some models allow for adjustment of the recline when the child is already seated, while others require adjustment before placing the child in the seat.

It is not recommended for newborns as babies should not be lifted more than 30 degrees due to the potential risk of musculoskeletal problems.
Swivel
No

Swivel

The seat has the ability to make a full rotation (360 degrees) for a change of orientation and immediate access to the child.

2. The rotation capability offers comfort and flexibility to the parent as they have easy access to any orientation the seat has.
Top Tether
No

Top Tether

It is an additional restraint strap located on the top or back of the seat, which holds it in place and reduces forward movement of the seat during a frontal collision, providing additional safety in case of an accident.
With Removable Covers
No
with Base
No

Technical Specifications

ADAC Test
Not Available

ADAC Test

ADAC is a company that conducts crash tests and evaluates car seats for safety, ergonomics, functionality, and the presence of harmful substances.
Swedish Plus Test
No

Swedish Plus Test

Considered the strictest crash test worldwide. It focuses on measuring the pressure exerted on the neck, imposing limits that only rear-facing seats can meet.
i-Size
No

i-Size

These are new generation seats that offer additional safety in case of side collision.


i-Size seats are designed according to the height, not the weight of the child, allowing them to travel rear-facing for a longer period of time.


i-Size seats do not replace weight-based car seats but offer an additional option. They are recommended for both newborns and older children.
Side Collision Protection
-

Side Collision Protection

An integrated system on the side of the seat that reduces the impact force of a side collision, protecting the child from serious injury.

Installation

ISOfix
Yes

ISOfix

It is a system for safely installing a child seat. To apply it, it is necessary for the rear seats of the car to have the corresponding metal receptacles, but all modern cars have them.

2. The isofix system is easier to install compared to seats that do not have it. The seat clicks into the car's receptacles and thus reduces the movement of the seat towards the front in the event of a collision.

3. Most seats that apply to all ages have the isofix system.
Seatbelt
Yes

Seatbelt

The car seat can be installed in the car using the vehicle's seat belt.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

368,90 €
74,00 €   shipping cost