Skroutz.mt

Mig Mma Welder 200a Model Kd1788
Welding Machines

Mig Mma Welder 200a Model Kd1788

MIG FLUX / MMA / TIG Welder 200A - KD1788

The KD1788 is a modern 2-in-1 inverter welder from KRAFT&DELE, which allows welding using MIG and MMA methods. Thanks to the wide current adjustment and...

MIG FLUX / MMA / TIG Welder 200A - KD1788

The KD1788 is a modern 2-in-1 inverter welder from KRAFT&DELE, which allows welding using MIG and MMA methods. Thanks to the wide current adjustment and compact design, the device is ideal for professional workshops and DIY projects. It includes a compact wire feeder that supports 200 mm spools and welding wire...

See full description See full description

Top specs

  • Welding Current

    200

    Suitable for professional use on thick metals, such as steel or cast iron constructions.

  • Duty Cycle

    The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

    2.

    For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.

  • Power Supply Voltage

    220

    It is the supply voltage that the machine requires from the electrical grid.
  • See all
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

MIG FLUX / MMA / TIG Welder 200A - KD1788

The KD1788 is a modern 2-in-1 inverter welder from KRAFT&DELE, which allows welding using MIG and MMA methods. Thanks to the wide current adjustment and compact design, the device is ideal for professional workshops and DIY projects. It includes a compact wire feeder that supports 200 mm spools and welding wire diameters of 0.8 and 1.0 mm. The high performance and 60% duty cycle ensure efficient and stable welding of steel, stainless steel, and other materials with thicknesses from 0.8 mm.

Product features:

  • Welding using MIG and MMA methods
  • Maximum welding current 200A
  • Compact and lightweight design
  • Wire feeder for 200 mm spools
  • Supports 0.8 mm and 1.0 mm diameter wire
  • Adjustable wire feed speed 2–13 m/min
  • Duty cycle 60%
  • High efficiency 80%
  • Protection class IP21
  • Ideal for welding steel and stainless steel

Technical data:

  • Brand: KRAFT&DELE
  • Model: KD1788
  • Power supply: Single-phase 220V ±15%
  • Frequency: 50/60 Hz
  • Rated input current: 30 A
  • MIG welding current: 40–200 A
  • MMA welding current: 20–200 A
  • Output voltage: 15.5–24 V
  • Duty cycle: 60%
  • Power factor: 0.73
  • Efficiency: 80%
  • Wire feeder: Compact
  • Wire feed speed: 2–13 m/min
  • Spool diameter: 200 mm
  • Wire diameter: 0.8 / 1.0 mm
  • Protection class: IP21
  • Insulation class: F
  • Minimum material thickness: 0.8 mm
  • Dimensions: 320 × 160 × 190 mm

Package contents:

  • MIG/MMA KD1788 welder
  • MIG welding torch
  • MMA welding holder
  • Ground cable
  • Instructions for use in Polish
  • Standard packaging
  • Receipt or VAT invoice

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
MIG, MMA, TIG

Type

MIG

The easiest welding method even for a beginner. 2. If the wire to be used does not have a special coating (flux), it should be connected to an external gas cylinder (e.g. argon, CO2).

MMA

Creates thick and strong bonds without the need for external gas supply, making it ideal for out-of-lab welding.

TIG

Slow welding for detailed work on aluminum and stainless steel, mainly. Requires experience and connection to an external gas cylinder. Does not create "spatters".
Welding Current (max)
200 A

Welding Current (max): 200


Suitable for professional use on thick metals, such as steel or cast iron constructions.
Operation Cycle (max Ampere)
60 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
220 V

Supply Voltage: 220


It is the supply voltage that the machine requires from the electrical grid.
Maximum Electrode Diameter
1 mm
Maximum Wire Diameter
1 mm

Maximum Wire Diameter: 1


The maximum wire thickness that the machine's wire feed can support, depending on the current intensity it can provide.
Weight
7500 gr

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
No
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
No
Anti Stick
No
Arc Force
No
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

MIG FLUX / MMA / TIG Welder 200A - KD1788

The KD1788 is a modern 2-in-1 inverter welder from KRAFT&DELE, which allows welding using MIG and MMA methods. Thanks to the wide current adjustment and compact design, the device is ideal for professional workshops and DIY projects. It includes a compact wire feeder that supports 200 mm spools and welding wire diameters of 0.8 and 1.0 mm. The high performance and 60% duty cycle ensure efficient and stable welding of steel, stainless steel, and other materials with thicknesses from 0.8 mm.

Product features:

  • Welding using MIG and MMA methods
  • Maximum welding current 200A
  • Compact and lightweight design
  • Wire feeder for 200 mm spools
  • Supports 0.8 mm and 1.0 mm diameter wire
  • Adjustable wire feed speed 2–13 m/min
  • Duty cycle 60%
  • High efficiency 80%
  • Protection class IP21
  • Ideal for welding steel and stainless steel

Technical data:

  • Brand: KRAFT&DELE
  • Model: KD1788
  • Power supply: Single-phase 220V ±15%
  • Frequency: 50/60 Hz
  • Rated input current: 30 A
  • MIG welding current: 40–200 A
  • MMA welding current: 20–200 A
  • Output voltage: 15.5–24 V
  • Duty cycle: 60%
  • Power factor: 0.73
  • Efficiency: 80%
  • Wire feeder: Compact
  • Wire feed speed: 2–13 m/min
  • Spool diameter: 200 mm
  • Wire diameter: 0.8 / 1.0 mm
  • Protection class: IP21
  • Insulation class: F
  • Minimum material thickness: 0.8 mm
  • Dimensions: 320 × 160 × 190 mm

Package contents:

  • MIG/MMA KD1788 welder
  • MIG welding torch
  • MMA welding holder
  • Ground cable
  • Instructions for use in Polish
  • Standard packaging
  • Receipt or VAT invoice

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
MIG, MMA, TIG

Type

MIG

The easiest welding method even for a beginner. 2. If the wire to be used does not have a special coating (flux), it should be connected to an external gas cylinder (e.g. argon, CO2).

MMA

Creates thick and strong bonds without the need for external gas supply, making it ideal for out-of-lab welding.

TIG

Slow welding for detailed work on aluminum and stainless steel, mainly. Requires experience and connection to an external gas cylinder. Does not create "spatters".
Welding Current (max)
200 A

Welding Current (max): 200


Suitable for professional use on thick metals, such as steel or cast iron constructions.
Operation Cycle (max Ampere)
60 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
220 V

Supply Voltage: 220


It is the supply voltage that the machine requires from the electrical grid.
Maximum Electrode Diameter
1 mm
Maximum Wire Diameter
1 mm

Maximum Wire Diameter: 1


The maximum wire thickness that the machine's wire feed can support, depending on the current intensity it can provide.
Weight
7500 gr

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
No
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
No
Anti Stick
No
Arc Force
No
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.