Skroutz.mt

Igbt Plasma Cutter 100% Duty Cycle Hf Start 230v 50a
Welding Machines

Igbt Plasma Cutter 100% Duty Cycle Hf Start 230v 50a

The Stamos Germany plasma cutter is ideal for plasma cutting in automotive industries, commercial metal processing companies, and industrial production. It also supports hobbyists in demanding...

The Stamos Germany plasma cutter is ideal for plasma cutting in automotive industries, commercial metal processing companies, and industrial production. It also supports hobbyists in demanding renovation and repair projects. The clear control panel with LED display and pressure gauge provides information about the set parameters. The cutting current is...

See full description See full description

Top specs

  • Welding Current

    50

    Suitable for use on thin sheets and DIY constructions.

  • Duty Cycle

    The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

    2.

    For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.

  • Power Supply Voltage

    230

    It is the supply voltage that the machine requires from the electrical grid.
  • See all
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

The Stamos Germany plasma cutter is ideal for plasma cutting in automotive industries, commercial metal processing companies, and industrial production. It also supports hobbyists in demanding renovation and repair projects. The clear control panel with LED display and pressure gauge provides information about the set parameters. The cutting current is adjustable from 20 to 50 A using a rotary knob.

  • Maximum cutting current: 50 A at 100% duty cycle
  • Modern IGBT inverter: Minimizes weight and dimensions
  • High precision and clean cuts: Supports materials up to 15 mm thick
  • Cooling: Powerful fan to prevent overheating
  • Control instruments: LED display, pressure gauge and rotary knob

The ignition torch is HF, allowing cutting of grids and frames with pilot arc. To prevent oxidation or deformation of the workpiece after cutting, a gas post-flow time of 5 or 10 seconds can be selected. This air flow also ensures arc cooling and prevents damage. The base unit features a powerful fan to prevent overheating.

  • Technical parameters:
  • Catalog number: 10021417
  • Item condition: New
  • Model: S-PLASMA50U
  • Material: ABS, stainless steel
  • Operating pressure [bar]: 4-6
  • Dimensions (LxWxH): 40 x 30 x 16 cm
  • Weight: 8.6 kg

The package includes:

  • Plasma cutter
  • AG60 torch with cable (4 m)
  • Ground clamp (2 m)
  • Pressure regulator

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Welding Current (max)
50 A

Welding Current (max): 50


Suitable for use on thin sheets and DIY constructions.
Operation Cycle (max Ampere)
100 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
230 V

Supply Voltage: 230


It is the supply voltage that the machine requires from the electrical grid.
Weight
8600 gr

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
Yes

IGBT


Allows the conversion of direct current (DC) voltage to alternating current (AC) or the output of direct current at a higher or lower intensity.
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
No
Anti Stick
No
Arc Force
No
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Stamos Germany plasma cutter is ideal for plasma cutting in automotive industries, commercial metal processing companies, and industrial production. It also supports hobbyists in demanding renovation and repair projects. The clear control panel with LED display and pressure gauge provides information about the set parameters. The cutting current is adjustable from 20 to 50 A using a rotary knob.

  • Maximum cutting current: 50 A at 100% duty cycle
  • Modern IGBT inverter: Minimizes weight and dimensions
  • High precision and clean cuts: Supports materials up to 15 mm thick
  • Cooling: Powerful fan to prevent overheating
  • Control instruments: LED display, pressure gauge and rotary knob

The ignition torch is HF, allowing cutting of grids and frames with pilot arc. To prevent oxidation or deformation of the workpiece after cutting, a gas post-flow time of 5 or 10 seconds can be selected. This air flow also ensures arc cooling and prevents damage. The base unit features a powerful fan to prevent overheating.

  • Technical parameters:
  • Catalog number: 10021417
  • Item condition: New
  • Model: S-PLASMA50U
  • Material: ABS, stainless steel
  • Operating pressure [bar]: 4-6
  • Dimensions (LxWxH): 40 x 30 x 16 cm
  • Weight: 8.6 kg

The package includes:

  • Plasma cutter
  • AG60 torch with cable (4 m)
  • Ground clamp (2 m)
  • Pressure regulator

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Welding Current (max)
50 A

Welding Current (max): 50


Suitable for use on thin sheets and DIY constructions.
Operation Cycle (max Ampere)
100 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
230 V

Supply Voltage: 230


It is the supply voltage that the machine requires from the electrical grid.
Weight
8600 gr

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
Yes

IGBT


Allows the conversion of direct current (DC) voltage to alternating current (AC) or the output of direct current at a higher or lower intensity.
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
No
Anti Stick
No
Arc Force
No
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.