Skroutz.mt

FN12A-S5 Case Fan 120mm (1600rpm / 41cfm) with RGB Lighting and 3-Pin / 4-Pin PWM Connection
Case Fans

FN12A-S5 Case Fan 120mm (1600rpm / 41cfm) with RGB Lighting and 3-Pin / 4-Pin PWM Connection

The GameMax FN12A-S5 fan cools the inside of your computer case with adjustable speeds from 800 to 1,600 rpm. Addressable RGB LED lighting is located in the center and can be controlled with an ARGB...

The GameMax FN12A-S5 fan cools the inside of your computer case with adjustable speeds from 800 to 1,600 rpm. Addressable RGB LED lighting is located in the center and can be controlled with an ARGB remote or via AURA Sync by connecting the ARGB hub to the motherboard’s 5V ARGB header. Intelligent Speed Control adjusts the fan speed.

  • Dimensions: 120 x 120 x...
See full description See full description
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

The GameMax FN12A-S5 fan cools the inside of your computer case with adjustable speeds from 800 to 1,600 rpm. Addressable RGB LED lighting is located in the center and can be controlled with an ARGB remote or via AURA Sync by connecting the ARGB hub to the motherboard’s 5V ARGB header. Intelligent Speed Control adjusts the fan speed.

  • Dimensions: 120 x 120 x 25 mm
  • Maximum rotation speed: 1,600 rpm
  • Minimum rotation speed: 800 rpm
  • Maximum airflow: 41 cfm
  • Air pressure: 1.83 mmH₂O
  • Maximum noise level: 30 dB
  • Bearing type: Hydraulic Bearing
  • Connections: 3-Pin ADD-RGB 5V (V-D-NC-G), 4-Pin PWM
  • Lighting: Addressable RGB LED, 8 LEDs in the center
  • Operating voltage: 12 V DC
  • Current: 0.15 A
  • Power consumption: 1.8 W
  • Lifetime: 30,000 hours
  • Color: Black

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Main Specifications

Dimension
120 mm

Dimension

The diameter of the fan in millimeters. The larger the fan, the more effective the cooling and the quieter its operation compared to a smaller one. The most common size is 120mm, with some computer cases supporting larger sizes such as 140mm.
Colour
Black

Technical Specifications

Fan Speed (Max)
1600 rpm

Fan Speed (Max)

The maximum rotations at which the fan turns. To reduce the rotations, it should be connected to a speed controller, either through a port on the motherboard that supports this function. Usually, the higher the rotations, the greater the flow but also the noise. As long as the needs for noise and air flow are covered, the rotations do not need to be taken into account.
Noise Level (Max)
30 dB

Noise Level (Max)

The noise produced by the fan when operating at maximum speed.

A medium noise fan produces 20-28dB, while those below 20dB are considered quiet.
Air Flow (Max)
41 cfm

Air Flow (Max)

The amount of air that the fan can push in one minute (cubic feet per minute) when operating at maximum speed.

The higher the number, the more effective the cooling that the fan can provide.

Higher quality fans can produce the same airflow with less noise and speed.
Connection
3-Pin, 4-Pin PWM

Connection

3-Pin
Plug for connecting the fan to the motherboard.

For connection to the power supply cable, an adapter to 4-Pin Molex is required.
4-Pin PWM
Plug for connecting the fan to the motherboard with the ability to control the fan speed. Usually used for cooling the processor. 2. It can also be connected to a 3-Pin socket but will always operate at maximum speed.
LED Color
RGB
Reverse Blade
No

Reverse Blade

Reverse blade fans reverse the airflow, allowing for intake without the interference of the frame, which reduces aerodynamic turbulence and noise. Additionally, apart from enhancing aesthetics and lighting, they make it easier to clean the blades and offer better cable management, as the wiring remains hidden behind the frame.
Air Pressure
1.83 mmH₂O: millimeters of water

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The GameMax FN12A-S5 fan cools the inside of your computer case with adjustable speeds from 800 to 1,600 rpm. Addressable RGB LED lighting is located in the center and can be controlled with an ARGB remote or via AURA Sync by connecting the ARGB hub to the motherboard’s 5V ARGB header. Intelligent Speed Control adjusts the fan speed.

  • Dimensions: 120 x 120 x 25 mm
  • Maximum rotation speed: 1,600 rpm
  • Minimum rotation speed: 800 rpm
  • Maximum airflow: 41 cfm
  • Air pressure: 1.83 mmH₂O
  • Maximum noise level: 30 dB
  • Bearing type: Hydraulic Bearing
  • Connections: 3-Pin ADD-RGB 5V (V-D-NC-G), 4-Pin PWM
  • Lighting: Addressable RGB LED, 8 LEDs in the center
  • Operating voltage: 12 V DC
  • Current: 0.15 A
  • Power consumption: 1.8 W
  • Lifetime: 30,000 hours
  • Color: Black

Manufacturer

Manufacturer Details

Warnings & Safety Information

Main Specifications

Dimension
120 mm

Dimension

The diameter of the fan in millimeters. The larger the fan, the more effective the cooling and the quieter its operation compared to a smaller one. The most common size is 120mm, with some computer cases supporting larger sizes such as 140mm.
Colour
Black

Technical Specifications

Fan Speed (Max)
1600 rpm

Fan Speed (Max)

The maximum rotations at which the fan turns. To reduce the rotations, it should be connected to a speed controller, either through a port on the motherboard that supports this function. Usually, the higher the rotations, the greater the flow but also the noise. As long as the needs for noise and air flow are covered, the rotations do not need to be taken into account.
Noise Level (Max)
30 dB

Noise Level (Max)

The noise produced by the fan when operating at maximum speed.

A medium noise fan produces 20-28dB, while those below 20dB are considered quiet.
Air Flow (Max)
41 cfm

Air Flow (Max)

The amount of air that the fan can push in one minute (cubic feet per minute) when operating at maximum speed.

The higher the number, the more effective the cooling that the fan can provide.

Higher quality fans can produce the same airflow with less noise and speed.
Connection
3-Pin, 4-Pin PWM

Connection

3-Pin
Plug for connecting the fan to the motherboard.

For connection to the power supply cable, an adapter to 4-Pin Molex is required.
4-Pin PWM
Plug for connecting the fan to the motherboard with the ability to control the fan speed. Usually used for cooling the processor. 2. It can also be connected to a 3-Pin socket but will always operate at maximum speed.
LED Color
RGB
Reverse Blade
No

Reverse Blade

Reverse blade fans reverse the airflow, allowing for intake without the interference of the frame, which reduces aerodynamic turbulence and noise. Additionally, apart from enhancing aesthetics and lighting, they make it easier to clean the blades and offer better cable management, as the wiring remains hidden behind the frame.
Air Pressure
1.83 mmH₂O: millimeters of water

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

GameMax