Fillers for imperfect drywall bonding 5kg Śnieżka MS30 is a ready-to-use mixture intended for manual drywall bonding without the need for reinforcing tape. It is also used for filling cracks and scratches on wall and ceiling surfaces. Śnieżka MS30 is a product based on polymeric, white inorganic fillers and functional agents. It is recommended for indoor use only.

Advantages and product features:

• Characterized by high durability and quality
• Thanks to a precisely selected formula, it is extremely resistant to bending
• Crack-resistant and possesses adequate elasticity
• Can also be used on cracks or scratches
• Completely ecological and free of harmful substances

Substrate preparation:

Drywalls must be firmly and securely installed. Before bonding, carefully clean the grooves. For cut edges, widen the groove and thoroughly clean the dust. The raw edges of frames should be carefully prepared with deep-penetration primer.

Application:

After mixing, apply the product on the surface using stainless steel or plastic tools. Carefully fill the groove and allow it to dry. If necessary, repeat the process after about 24 hours. After drying, surface corrections can be made using a sanding mesh or sandpaper.

Storage:

Store in the product packaging in dry, dark places away from heat sources. Protect from overheating and frost.

Specifications:

• Brand: Śnieżka
• Capacity: 5 kg
• Maximum layer thickness: approximately 10 mm
• Coverage: 0.23 kg/m² at 1 mm layer thickness
• Drying time: Depending on the layer thickness and environmental conditions, drying is estimated at 10 mm per day
• The product has a sanitary certificate

Application: Fillers for imperfect drywall bonding