Description
Specifications
The Stanley 2-15-599 PVC saw has a 0.85 mm thick Swedish steel blade with 11 teeth per inch. The teeth are ground on three sides for a sharp edge along the entire blade and induction-hardened to stay sharp twice as long.
The two-material handle is screwed in place and ultrasonically welded, and allows cutting at 45° and 90°. The blade cuts on both the push and pull strokes, increasing cutting efficiency by 30%. It is suitable for finishing wood and wood-based materials, such as skirting boards, plywood, melamine and PVC.
- Type: PVC saw
- Blade length: 50 cm
- Blade thickness: 0.85 mm
- Teeth per inch: 11
- Tooth grind: Three-sided
- Tooth hardening: Induction-hardened
- Blade material: Swedish steel
- Handle material: Two materials
- Handle attachment: Screwed in place and ultrasonically welded
- Cutting angles: 45° and 90°
- Cutting direction: Push and pull strokes
- Suitable materials: Wood, wood-based materials, skirting boards, plywood, melamine and PVC
- Type
- PVC Saw
- Blade Length
- 50 cm
- with Mitre Box
- No
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.