Skroutz.mt

Eaton Automatic Circuit Breaker 1p C 10a 10ka Dc Pl7-c10/1-dc 264887
Automatic Circuit Breaker

Eaton Automatic Circuit Breaker 1p C 10a 10ka Dc Pl7-c10/1-dc 264887

Eaton PL7-C10/1-DC circuit breaker for DC systems, with 1 pole and C characteristic. Rated current 10 A and breaking capacity 10 kA according to EN 60898. Protects the electrical installation from...

Eaton PL7-C10/1-DC circuit breaker for DC systems, with 1 pole and C characteristic. Rated current 10 A and breaking capacity 10 kA according to EN 60898. Protects the electrical installation from overload and short circuit.

  • Rated voltage: 48 V
  • Degree of protection: IP20
  • Number of poles: 1
  • Compliance certifications: CE, WEEE
  • Dimensions: length 80 mm, width...
See full description See full description
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

Eaton PL7-C10/1-DC circuit breaker for DC systems, with 1 pole and C characteristic. Rated current 10 A and breaking capacity 10 kA according to EN 60898. Protects the electrical installation from overload and short circuit.

  • Rated voltage: 48 V
  • Degree of protection: IP20
  • Number of poles: 1
  • Compliance certifications: CE, WEEE
  • Dimensions: length 80 mm, width 7 mm, mounting depth 70.5 mm
  • Width: 1 module
  • Overvoltage category: 3
  • Energy limiting class: 3
  • Rated breaking capacity according to IEC 60947-2: 0 kA
  • Rated breaking capacity according to EN 60898: 10 kA
  • Pollution degree: 2
  • Accessory capability: Yes
  • Tripping characteristic: C
  • Code: PL7-C10/1-DC 264887

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Specifications

Number of Poles
1
Rated Current
10 A
Operating Curve
Curve C

Operating Curve

The tripping curve shows the time required for the circuit breaker to switch off in relation to the current passing through it. For small overcurrents, the tripping is delayed to avoid unnecessary interruptions, while for very high values, such as in the case of a short circuit, the breaker operates immediately to protect the circuit. Different types of curves are used depending on the needs of each installation and the type of loads.

Curve C

The most common in general installations, ideal for circuits with motors or electronic devices.

Power Supply

AC
No
DC
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Eaton PL7-C10/1-DC circuit breaker for DC systems, with 1 pole and C characteristic. Rated current 10 A and breaking capacity 10 kA according to EN 60898. Protects the electrical installation from overload and short circuit.

  • Rated voltage: 48 V
  • Degree of protection: IP20
  • Number of poles: 1
  • Compliance certifications: CE, WEEE
  • Dimensions: length 80 mm, width 7 mm, mounting depth 70.5 mm
  • Width: 1 module
  • Overvoltage category: 3
  • Energy limiting class: 3
  • Rated breaking capacity according to IEC 60947-2: 0 kA
  • Rated breaking capacity according to EN 60898: 10 kA
  • Pollution degree: 2
  • Accessory capability: Yes
  • Tripping characteristic: C
  • Code: PL7-C10/1-DC 264887

Manufacturer

Manufacturer Details

Warnings & Safety Information

Specifications

Number of Poles
1
Rated Current
10 A
Operating Curve
Curve C

Operating Curve

The tripping curve shows the time required for the circuit breaker to switch off in relation to the current passing through it. For small overcurrents, the tripping is delayed to avoid unnecessary interruptions, while for very high values, such as in the case of a short circuit, the breaker operates immediately to protect the circuit. Different types of curves are used depending on the needs of each installation and the type of loads.

Curve C

The most common in general installations, ideal for circuits with motors or electronic devices.

Power Supply

AC
No
DC
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.