Skroutz.mt

Gacia N8bh 10ka C 3p 40a Automatic Circuit Breaker
Automatic Circuit Breaker

Gacia N8bh 10ka C 3p 40a Automatic Circuit Breaker

The GACIA N8BH 10KA C 3P 40A miniature circuit breaker interrupts the circuit when the current exceeds a safe level, protecting against overloads and short circuits. The C tripping characteristic is...

The GACIA N8BH 10KA C 3P 40A miniature circuit breaker interrupts the circuit when the current exceeds a safe level, protecting against overloads and short circuits. The C tripping characteristic is suitable for circuits with possible momentary overloads, such as from motors or transformers. It complies with IEC/EN 60898-1.

Technical specifications:

  • ...
See full description See full description

Learn more about invoicing
Review the product
Product report

Description

Description

The GACIA N8BH 10KA C 3P 40A miniature circuit breaker interrupts the circuit when the current exceeds a safe level, protecting against overloads and short circuits. The C tripping characteristic is suitable for circuits with possible momentary overloads, such as from motors or transformers. It complies with IEC/EN 60898-1.

Technical specifications:

  • Manufacturer: GACIA
  • EAN: 5905440093481
  • Rated current (In): 40 A
  • Poles: 3
  • Tripping characteristic: C
  • Uimp: 4 kV
  • Icn: 10000 A
  • Ue: 230/400 V
  • Ui: 500 V
  • Frequency: 50/60 Hz
  • Mechanical life: 18000 cycles
  • Electrical life: 8000 cycles
  • Operating position indicator: yes
  • Degree of protection: IP 20
  • Storage temperature: -30/+70°C
  • Operating temperature: -30/+50°C
  • Maximum conductor cross-section: 25 mm²
  • Tightening torque: 3 Nm
  • Connection via comb busbars: yes

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Specifications

Number of Poles
3
Rated Current
40 A
Operating Curve
Curve C

Operating Curve

The tripping curve shows the time required for the circuit breaker to switch off in relation to the current passing through it. For small overcurrents, the tripping is delayed to avoid unnecessary interruptions, while for very high values, such as in the case of a short circuit, the breaker operates immediately to protect the circuit. Different types of curves are used depending on the needs of each installation and the type of loads.

Curve C

The most common in general installations, ideal for circuits with motors or electronic devices.

Power Supply

AC
No
DC
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The GACIA N8BH 10KA C 3P 40A miniature circuit breaker interrupts the circuit when the current exceeds a safe level, protecting against overloads and short circuits. The C tripping characteristic is suitable for circuits with possible momentary overloads, such as from motors or transformers. It complies with IEC/EN 60898-1.

Technical specifications:

  • Manufacturer: GACIA
  • EAN: 5905440093481
  • Rated current (In): 40 A
  • Poles: 3
  • Tripping characteristic: C
  • Uimp: 4 kV
  • Icn: 10000 A
  • Ue: 230/400 V
  • Ui: 500 V
  • Frequency: 50/60 Hz
  • Mechanical life: 18000 cycles
  • Electrical life: 8000 cycles
  • Operating position indicator: yes
  • Degree of protection: IP 20
  • Storage temperature: -30/+70°C
  • Operating temperature: -30/+50°C
  • Maximum conductor cross-section: 25 mm²
  • Tightening torque: 3 Nm
  • Connection via comb busbars: yes

Manufacturer

Manufacturer Details

Warnings & Safety Information

Specifications

Number of Poles
3
Rated Current
40 A
Operating Curve
Curve C

Operating Curve

The tripping curve shows the time required for the circuit breaker to switch off in relation to the current passing through it. For small overcurrents, the tripping is delayed to avoid unnecessary interruptions, while for very high values, such as in the case of a short circuit, the breaker operates immediately to protect the circuit. Different types of curves are used depending on the needs of each installation and the type of loads.

Curve C

The most common in general installations, ideal for circuits with motors or electronic devices.

Power Supply

AC
No
DC
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

15,90 €
14,00 €   shipping cost