Motion Sensors

Satel Wired Motion Sensor Microwave & Infrared Scope 3m

The Satel wired motion sensor combines PIR infrared and microwave detection to detect movement. It is mounted on the ceiling and can be installed flush-mounted or surface-mounted. It is powered...

The Satel wired motion sensor combines PIR infrared and microwave detection to detect movement. It is mounted on the ceiling and can be installed flush-mounted or surface-mounted. It is powered directly by 230 V AC and features a dusk sensor that activates the lighting when light levels are low.

  • Detection type: PIR infrared and microwave
  • Range: 3 m
  • ...
See full description See full description

Top specs

  • See all
79 90 €
Delivery Mon, 16 Nov - Fri, 20 Nov
14,00 €   shipping cost
Sent from Greece
From Getters 4.6 (112)

Learn more about invoicing

Description

Description

The Satel wired motion sensor combines PIR infrared and microwave detection to detect movement. It is mounted on the ceiling and can be installed flush-mounted or surface-mounted. It is powered directly by 230 V AC and features a dusk sensor that activates the lighting when light levels are low.

  • Detection type: PIR infrared and microwave
  • Range: 3 m
  • Connection: Wired
  • Mounting: Ceiling
  • Installation: Flush-mounted or surface-mounted
  • Power supply: 230 V AC, 50 Hz
  • Maximum power consumption: 500 mW
  • Standby power consumption: 200 mW
  • Control output: 8 A / 250 V AC, NO relay
  • Detectable movement speed: 0.3–3 m/s
  • Lighting activation time: 2–180 s
  • Recommended installation height: 2.4–3.5 m
  • Detection area at a height of 2.4 m: 12 × 5 m (56 m²)
  • Detection area at a height of 3 m: 14 × 6 m (80 m²)
  • Operating temperature range: -10 to +55 °C
  • Maximum humidity: 93±3%
  • Dimensions: Ø 120 × 37 mm
  • Microwave frequency: 24.125 GHz
  • Contact resistance: ≤ 100 mΩ

Manufacturer

See full description

Specifications

Specifications

Specifications

Detection Type
Infrared, Microwave
Scope
3 m
Connector
Wired
Battery
No

Additional Features

Antimasking
No
Tamper
No
Curtain
No
Placement
Ceiling
Recessed
Yes
PET
No
Built-in Camera
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Satel wired motion sensor combines PIR infrared and microwave detection to detect movement. It is mounted on the ceiling and can be installed flush-mounted or surface-mounted. It is powered directly by 230 V AC and features a dusk sensor that activates the lighting when light levels are low.

  • Detection type: PIR infrared and microwave
  • Range: 3 m
  • Connection: Wired
  • Mounting: Ceiling
  • Installation: Flush-mounted or surface-mounted
  • Power supply: 230 V AC, 50 Hz
  • Maximum power consumption: 500 mW
  • Standby power consumption: 200 mW
  • Control output: 8 A / 250 V AC, NO relay
  • Detectable movement speed: 0.3–3 m/s
  • Lighting activation time: 2–180 s
  • Recommended installation height: 2.4–3.5 m
  • Detection area at a height of 2.4 m: 12 × 5 m (56 m²)
  • Detection area at a height of 3 m: 14 × 6 m (80 m²)
  • Operating temperature range: -10 to +55 °C
  • Maximum humidity: 93±3%
  • Dimensions: Ø 120 × 37 mm
  • Microwave frequency: 24.125 GHz
  • Contact resistance: ≤ 100 mΩ

Manufacturer

Specifications

Detection Type
Infrared, Microwave
Scope
3 m
Connector
Wired
Battery
No

Additional Features

Antimasking
No
Tamper
No
Curtain
No
Placement
Ceiling
Recessed
Yes
PET
No
Built-in Camera
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

79,90 €
14,00 €   shipping cost