Special Measuring Instruments

Nivel System Point 6 Gnss Receiver Laser Nt-55 Controller

Point 6 - Speed and convenience

The Point 6 GNSS receiver with IMU and next-generation laser is suitable for measuring or marking points in hard-to-reach areas such as under bridges or behind fences....

Point 6 - Speed and convenience

The Point 6 GNSS receiver with IMU and next-generation laser is suitable for measuring or marking points in hard-to-reach areas such as under bridges or behind fences. The Nivel System Point 6 + NT-55 set has been specifically designed for these cases.

IMU - Fast measurement with pole tilt

  • Measurement with the pole tilted...
See full description See full description
The product is not available for shipping to the selected country.

Description

Description

Point 6 - Speed and convenience

The Point 6 GNSS receiver with IMU and next-generation laser is suitable for measuring or marking points in hard-to-reach areas such as under bridges or behind fences. The Nivel System Point 6 + NT-55 set has been specifically designed for these cases.

IMU - Fast measurement with pole tilt

  • Measurement with the pole tilted between 0 and 90°.
  • Horizontal accuracy: 8 mm + 0.7 mm/° of tilt.
  • Vertical accuracy: 15 mm + 0.7 mm/° of tilt.

Measuring building corners, fences, curbs and small architectural elements becomes faster and more convenient.

Integrated laser and markings in the real image

The green class 3R laser allows measuring difficult points with accuracy up to 2 cm at 10 m. The optical extension functions and CAD markings in the real image make it easier to quickly identify points and lines.

GNSS performance

  • 1408 GNSS channels with all unblocked constellations.
  • Supported signals: GPS, GLONASS, Galileo, BeiDou, QZSS, NavIC, SBAS and PPP services.
  • RTK, VRS, Static, PPK, base-rover UHF, PPP and Hi-Fix modes.
  • Accuracy: 8 mm + 1 ppm RMS horizontally and 15 mm + 1 ppm RMS vertically.
  • Position update rate: 1-20 Hz.
  • Maintaining a fixed solution via GSM signal: RTK accuracy + 10 mm/min.

Connectivity and autonomy

  • Built-in 4G LTE modem, Wi-Fi, Bluetooth 5.2, NFC, USB-C and 1-1.5 W UHF LoRa radio modem.
  • Operating range 15-20 km in base-rover setup, depending on conditions.
  • Li-ion battery 7.2 V / 4900 mAh with up to 20 hours of operation in rover RTK mode.

Field-ready construction

  • IP68 protection.
  • Resistant to drops from 1.8 m onto concrete.
  • Complies with MIL-STD-810G for shocks and vibrations.
  • Maximum weight 0.73 kg.
  • Operating temperature: -40...+75 °C.

Nivel System NT-55 controller

The included controller runs on Android 11, has an octa-core 2.0 GHz processor and 4 GB RAM, 64 GB internal memory, a 5.5-inch touchscreen, 13 MP camera, Dual SIM, dual-band Wi-Fi, Bluetooth 5.1, NFC and IP68 protection.

Set contents

  • Nivel System Point 6 receiver.
  • NT-55 controller and pole mount.
  • Nsurv measurement software.
  • Multiport USB charger and USB-C cables.
  • Spare battery for the controller.
  • Carrying case.
  • Digital user manual and receiver certificate.

Number of channels: 1408

Bluetooth: Bluetooth 5.1, BLE

NFC: Yes

Recorded signals:

  • GPS: L1C/A, L1C, L2P(Y), L2C, L5;
  • GLONASS: L1, L2, L3;
  • Galileo: E1, E5a, E5b, E6;
  • BeiDou: B1I, B2I, B3I;

Manufacturer

See full description

Specifications

Specifications

Digital
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Point 6 - Speed and convenience

The Point 6 GNSS receiver with IMU and next-generation laser is suitable for measuring or marking points in hard-to-reach areas such as under bridges or behind fences. The Nivel System Point 6 + NT-55 set has been specifically designed for these cases.

IMU - Fast measurement with pole tilt

  • Measurement with the pole tilted between 0 and 90°.
  • Horizontal accuracy: 8 mm + 0.7 mm/° of tilt.
  • Vertical accuracy: 15 mm + 0.7 mm/° of tilt.

Measuring building corners, fences, curbs and small architectural elements becomes faster and more convenient.

Integrated laser and markings in the real image

The green class 3R laser allows measuring difficult points with accuracy up to 2 cm at 10 m. The optical extension functions and CAD markings in the real image make it easier to quickly identify points and lines.

GNSS performance

  • 1408 GNSS channels with all unblocked constellations.
  • Supported signals: GPS, GLONASS, Galileo, BeiDou, QZSS, NavIC, SBAS and PPP services.
  • RTK, VRS, Static, PPK, base-rover UHF, PPP and Hi-Fix modes.
  • Accuracy: 8 mm + 1 ppm RMS horizontally and 15 mm + 1 ppm RMS vertically.
  • Position update rate: 1-20 Hz.
  • Maintaining a fixed solution via GSM signal: RTK accuracy + 10 mm/min.

Connectivity and autonomy

  • Built-in 4G LTE modem, Wi-Fi, Bluetooth 5.2, NFC, USB-C and 1-1.5 W UHF LoRa radio modem.
  • Operating range 15-20 km in base-rover setup, depending on conditions.
  • Li-ion battery 7.2 V / 4900 mAh with up to 20 hours of operation in rover RTK mode.

Field-ready construction

  • IP68 protection.
  • Resistant to drops from 1.8 m onto concrete.
  • Complies with MIL-STD-810G for shocks and vibrations.
  • Maximum weight 0.73 kg.
  • Operating temperature: -40...+75 °C.

Nivel System NT-55 controller

The included controller runs on Android 11, has an octa-core 2.0 GHz processor and 4 GB RAM, 64 GB internal memory, a 5.5-inch touchscreen, 13 MP camera, Dual SIM, dual-band Wi-Fi, Bluetooth 5.1, NFC and IP68 protection.

Set contents

  • Nivel System Point 6 receiver.
  • NT-55 controller and pole mount.
  • Nsurv measurement software.
  • Multiport USB charger and USB-C cables.
  • Spare battery for the controller.
  • Carrying case.
  • Digital user manual and receiver certificate.

Number of channels: 1408

Bluetooth: Bluetooth 5.1, BLE

NFC: Yes

Recorded signals:

  • GPS: L1C/A, L1C, L2P(Y), L2C, L5;
  • GLONASS: L1, L2, L3;
  • Galileo: E1, E5a, E5b, E6;
  • BeiDou: B1I, B2I, B3I;

Manufacturer

Digital
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.