Skroutz.mt

Eaton Miniature Circuit Breaker 2P D 20A 25KA AC AZ-2-D20 174502
Automatic Circuit Breaker

Eaton Miniature Circuit Breaker 2P D 20A 25KA AC AZ-2-D20 174502

Two-pole miniature circuit breaker Eaton AZ-2-D20 with D tripping characteristic, for protecting electrical installations against overload and short circuit. Code: AZ-2-D20 174502.

  • Number of poles: 2...

Two-pole miniature circuit breaker Eaton AZ-2-D20 with D tripping characteristic, for protecting electrical installations against overload and short circuit. Code: AZ-2-D20 174502.

  • Number of poles: 2
  • Rated current: 20 A
  • Short-circuit capacity: 25 kA
  • Installation depth: 75 mm
  • Rated voltage: 240 V
  • Rated insulation voltage: 440 V
  • Rated impulse voltage: 4 kV
  • ...
See full description See full description
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

Two-pole miniature circuit breaker Eaton AZ-2-D20 with D tripping characteristic, for protecting electrical installations against overload and short circuit. Code: AZ-2-D20 174502.

  • Number of poles: 2
  • Rated current: 20 A
  • Short-circuit capacity: 25 kA
  • Installation depth: 75 mm
  • Rated voltage: 240 V
  • Rated insulation voltage: 440 V
  • Rated impulse voltage: 4 kV
  • Breaking capacity Icu according to IEC 60947-2 at 230 V: 15 kA
  • Breaking capacity Icu according to IEC 60947-2 at 400 V: 15 kA
  • Voltage type: AC
  • Frequency: 50..60 Hz
  • Current limiting class: 3
  • Degree of protection: IP20
  • Operating temperature: -25..55 °C
  • Conductor cross-section, stranded/solid: 2.5..50 mm²
  • Explosion protection: no
  • EAN: 4015081709588

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Specifications

Number of Poles
2
Rated Current
20 A
Operating Curve
Curve D

Operating Curve

The tripping curve shows the time required for the circuit breaker to switch off in relation to the current passing through it. For small overcurrents, the tripping is delayed to avoid unnecessary interruptions, while for very high values, such as in the case of a short circuit, the breaker operates immediately to protect the circuit. Different types of curves are used depending on the needs of each installation and the type of loads.

Curve D

It is used for heavy loads with high starting peaks, such as large motors and transformers.

Power Supply

AC
Yes
DC
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Two-pole miniature circuit breaker Eaton AZ-2-D20 with D tripping characteristic, for protecting electrical installations against overload and short circuit. Code: AZ-2-D20 174502.

  • Number of poles: 2
  • Rated current: 20 A
  • Short-circuit capacity: 25 kA
  • Installation depth: 75 mm
  • Rated voltage: 240 V
  • Rated insulation voltage: 440 V
  • Rated impulse voltage: 4 kV
  • Breaking capacity Icu according to IEC 60947-2 at 230 V: 15 kA
  • Breaking capacity Icu according to IEC 60947-2 at 400 V: 15 kA
  • Voltage type: AC
  • Frequency: 50..60 Hz
  • Current limiting class: 3
  • Degree of protection: IP20
  • Operating temperature: -25..55 °C
  • Conductor cross-section, stranded/solid: 2.5..50 mm²
  • Explosion protection: no
  • EAN: 4015081709588

Manufacturer

Manufacturer Details

Warnings & Safety Information

Specifications

Number of Poles
2
Rated Current
20 A
Operating Curve
Curve D

Operating Curve

The tripping curve shows the time required for the circuit breaker to switch off in relation to the current passing through it. For small overcurrents, the tripping is delayed to avoid unnecessary interruptions, while for very high values, such as in the case of a short circuit, the breaker operates immediately to protect the circuit. Different types of curves are used depending on the needs of each installation and the type of loads.

Curve D

It is used for heavy loads with high starting peaks, such as large motors and transformers.

Power Supply

AC
Yes
DC
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.