Skroutz.mt

Wurth ESS 100-Multi Multi-Sander 180W with Speed Setting and Dust Suction System
Sanders

Wurth ESS 100-Multi Multi-Sander 180W with Speed Setting and Dust Suction System

The electric sander offers features that ensure efficient operation:

  • Self-adhesive sanding sheet attachment with dimensions 115 x 107 mm (square), 133 x 80 mm (rectangular) and 150 x 100 mm...

The electric sander offers features that ensure efficient operation:

  • Self-adhesive sanding sheet attachment with dimensions 115 x 107 mm (square), 133 x 80 mm (rectangular) and 150 x 100 mm (triangular).
  • Spring clamp with dimensions 115 x 140 mm (square).
  • Suitable for areas fully coated with soft-touch material.
  • Good grip in any working position.
  • Powerful...
See full description See full description

Top specs

  • Power

    Indicates the power of the motor.

    Higher power → stronger material removal and more effective sanding, especially on hard materials.

  • Speed Setting

    Ability to control the rotation speed of the tool.

    1

  • Oscillation Range

    Refers to the amount/length of the back-and-forth or up-and-down movement of the disc or base (greater range removes more material, smaller range provides a more precise finish).

    1.6

    Very fine sanding, sensitive materials, finishing.

  • RPM (Revolutions Per Minute)

    • High speeds → fast material removal
    • Low speeds → finer, more controlled finish
  • See all
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

The electric sander offers features that ensure efficient operation:

  • Self-adhesive sanding sheet attachment with dimensions 115 x 107 mm (square), 133 x 80 mm (rectangular) and 150 x 100 mm (triangular).
  • Spring clamp with dimensions 115 x 140 mm (square).
  • Suitable for areas fully coated with soft-touch material.
  • Good grip in any working position.
  • Powerful 180 W motor for high performance.
  • Good material removal rate under load.
  • Semi-transparent dust collection box with microfilter.
  • Mobile dust removal system.
  • Screw-on threaded cap.
  • Dust removal without any amount escaping.
  • Dust extraction connection.
  • Optional vacuum cleaner connection.
  • Collection of consumables.
  • The correct combination of sandpaper for each task.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Specifications

Type
Multi-Sander

Type

Multi-Sander
For smoothing all surfaces with alternating sanding bases.
Power Source
Electric

Power Source

The method of supplying power to the tool.
Oscillation Range
1.6 mm

Oscillation Range: 1.6

Refers to the amount/length of the back-and-forth or up-and-down movement of the disc or base (greater range removes more material, smaller range provides a more precise finish).


Very fine sanding, sensitive materials, finishing.
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Power Specifications

Power
180 W

Power

Indicates the power of the motor.

Higher power → stronger material removal and more effective sanding, especially on hard materials.

Features & Functions

Dust Suction System
Yes

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
Yes

Speed Setting

Ability to control the rotation speed of the tool.
Turns
24000 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
No

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
Yes

Sandpaper / Belt Specifications

Velcro
No

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Without
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The electric sander offers features that ensure efficient operation:

  • Self-adhesive sanding sheet attachment with dimensions 115 x 107 mm (square), 133 x 80 mm (rectangular) and 150 x 100 mm (triangular).
  • Spring clamp with dimensions 115 x 140 mm (square).
  • Suitable for areas fully coated with soft-touch material.
  • Good grip in any working position.
  • Powerful 180 W motor for high performance.
  • Good material removal rate under load.
  • Semi-transparent dust collection box with microfilter.
  • Mobile dust removal system.
  • Screw-on threaded cap.
  • Dust removal without any amount escaping.
  • Dust extraction connection.
  • Optional vacuum cleaner connection.
  • Collection of consumables.
  • The correct combination of sandpaper for each task.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Specifications

Type
Multi-Sander

Type

Multi-Sander
For smoothing all surfaces with alternating sanding bases.
Power Source
Electric

Power Source

The method of supplying power to the tool.
Oscillation Range
1.6 mm

Oscillation Range: 1.6

Refers to the amount/length of the back-and-forth or up-and-down movement of the disc or base (greater range removes more material, smaller range provides a more precise finish).


Very fine sanding, sensitive materials, finishing.
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Power Specifications

Power
180 W

Power

Indicates the power of the motor.

Higher power → stronger material removal and more effective sanding, especially on hard materials.

Features & Functions

Dust Suction System
Yes

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
Yes

Speed Setting

Ability to control the rotation speed of the tool.
Turns
24000 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
No

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
Yes

Sandpaper / Belt Specifications

Velcro
No

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Without
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.