Skroutz.mt

Pancontrol Digital Clamp Meter 200A AC with NCV Maximum Jaw Opening 20mm
Clamp Meters

Pancontrol Digital Clamp Meter 200A AC with NCV Maximum Jaw Opening 20mm

The digital clamp meter PANCONTROL PAN 200A+ enables AC current measurement up to 200 A, as well as voltage, resistance, and frequency. It features:

  • Automatic measurement range selection
  • Backlit 13...

The digital clamp meter PANCONTROL PAN 200A+ enables AC current measurement up to 200 A, as well as voltage, resistance, and frequency. It features:

  • Automatic measurement range selection
  • Backlit 13 mm digital display
  • Data Hold function
  • Non-contact voltage detection (NCV)
  • Single-pole phase detection with audible alarm

Additional features:

  • DC voltage...
See full description See full description

Learn more about invoicing
Review the product
Product report

Description

Description

The digital clamp meter PANCONTROL PAN 200A+ enables AC current measurement up to 200 A, as well as voltage, resistance, and frequency. It features:

  • Automatic measurement range selection
  • Backlit 13 mm digital display
  • Data Hold function
  • Non-contact voltage detection (NCV)
  • Single-pole phase detection with audible alarm

Additional features:

  • DC voltage measurement: up to 600 V
  • AC voltage measurement: up to 600 V
  • Maximum resistance measurement: 6 kΩ
  • Frequency range: 40 Hz–1 kHz
  • Clamp opening: 20 mm
  • Overvoltage category: CAT III 600 V
  • Accuracy: 0.5–2.5%
  • Resolution: 1 mA
  • Dimensions: 158 x 53 x 28 mm
  • Weight: 150 g
  • Power supply: 2 x 1.5V AAA (included)

Contents: clamp meter, test leads, user manual, case.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Maximum Jaw Opening
20 mm

Maximum Jaw Opening

The maximum cable or conductor diameter that the clamp can grip in order to perform a measurement.
with Test Leads
-
AC Current
200 A
Indication
Digital
Bluetooth
No
Safety Category
CAT III
ISO/NIST Calibration Certificate
-

Features & Functions

Inrush Current
-

Inrush Current

Ability to record the instantaneous inrush current (duration ~100ms) absorbed by electric motors, motor-driven devices, and compressors during their momentary startup.
True RMS
-
NCV
Yes
LoZ (Low Impedance / Low Impedance)
-

LoZ (Low Impedance / Low Impedance)

Low impedance function that absorbs induced/parasitic voltages ("phantom" voltages or ghost voltages) from adjacent cables, ensuring that you measure only the actual line voltage.
VFD Mode / LPF (Low Pass Filter)
-

VFD Mode / LPF (Low Pass Filter)

Integrated low-pass filter that cuts off high-frequency harmonic noise (PWM) produced by variable speed drives, allowing accurate voltage and frequency measurement in Inverters.
Temperature Measurement
-

Temperature Measurement

Ability to measure temperature via a connected thermocouple (Type-K terminal), allowing temperature monitoring of pipes, refrigerants, and HVAC components.
Capacitor Capacitance Measurement
-

Capacitor Capacitance Measurement

Ability to test and measure capacitor capacitance, allowing the immediate diagnosis of worn starting capacitors in motors, pumps, and compressors.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The digital clamp meter PANCONTROL PAN 200A+ enables AC current measurement up to 200 A, as well as voltage, resistance, and frequency. It features:

  • Automatic measurement range selection
  • Backlit 13 mm digital display
  • Data Hold function
  • Non-contact voltage detection (NCV)
  • Single-pole phase detection with audible alarm

Additional features:

  • DC voltage measurement: up to 600 V
  • AC voltage measurement: up to 600 V
  • Maximum resistance measurement: 6 kΩ
  • Frequency range: 40 Hz–1 kHz
  • Clamp opening: 20 mm
  • Overvoltage category: CAT III 600 V
  • Accuracy: 0.5–2.5%
  • Resolution: 1 mA
  • Dimensions: 158 x 53 x 28 mm
  • Weight: 150 g
  • Power supply: 2 x 1.5V AAA (included)

Contents: clamp meter, test leads, user manual, case.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Maximum Jaw Opening
20 mm

Maximum Jaw Opening

The maximum cable or conductor diameter that the clamp can grip in order to perform a measurement.
with Test Leads
-
AC Current
200 A
Indication
Digital
Bluetooth
No
Safety Category
CAT III
ISO/NIST Calibration Certificate
-

Features & Functions

Inrush Current
-

Inrush Current

Ability to record the instantaneous inrush current (duration ~100ms) absorbed by electric motors, motor-driven devices, and compressors during their momentary startup.
True RMS
-
NCV
Yes
LoZ (Low Impedance / Low Impedance)
-

LoZ (Low Impedance / Low Impedance)

Low impedance function that absorbs induced/parasitic voltages ("phantom" voltages or ghost voltages) from adjacent cables, ensuring that you measure only the actual line voltage.
VFD Mode / LPF (Low Pass Filter)
-

VFD Mode / LPF (Low Pass Filter)

Integrated low-pass filter that cuts off high-frequency harmonic noise (PWM) produced by variable speed drives, allowing accurate voltage and frequency measurement in Inverters.
Temperature Measurement
-

Temperature Measurement

Ability to measure temperature via a connected thermocouple (Type-K terminal), allowing temperature monitoring of pipes, refrigerants, and HVAC components.
Capacitor Capacitance Measurement
-

Capacitor Capacitance Measurement

Ability to test and measure capacitor capacitance, allowing the immediate diagnosis of worn starting capacitors in motors, pumps, and compressors.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

109,90 €
14,00 €   shipping cost