Skroutz.mt

Bradas Irrigation Programmer Battery
Irrigation Programmers

Bradas Irrigation Programmer Battery

The Bradas WL-3137/1 electronic irrigation controller features:

  • LCD display
  • 4 independent spray programs
  • Automatic and manual operation
  • Irrigation duration adjustment from 1 to 240 minutes
  • Irrigation...

The Bradas WL-3137/1 electronic irrigation controller features:

  • LCD display
  • 4 independent spray programs
  • Automatic and manual operation
  • Irrigation duration adjustment from 1 to 240 minutes
  • Irrigation frequency every 2 or 3 days or on selected days
  • ECO mode that activates irrigation only when the soil is dry
  • Connection for a moisture sensor (not included)

...

See full description See full description

Top specs

  • Protection Certification

    IPX4

    IPX4 indicates that the device is protected from water splashes from all directions. IP refers to ingress protection, X means there is no protection against dust, and 4 means that the device can withstand water splashes from any angle without affecting its operation.
  • See all

Learn more about invoicing
Review the product
Product report

Description

Description

The Bradas WL-3137/1 electronic irrigation controller features:

  • LCD display
  • 4 independent spray programs
  • Automatic and manual operation
  • Irrigation duration adjustment from 1 to 240 minutes
  • Irrigation frequency every 2 or 3 days or on selected days
  • ECO mode that activates irrigation only when the soil is dry
  • Connection for a moisture sensor (not included)

Technical specifications:

  • Model: WL-3137/1
  • Water connection: GW1' - GW3/4'
  • Output: GZ 3/4' + fitting for quick connector
  • Operating pressure: 0.34 - 8.27 bar
  • Flow rate: 38 L/min (at approximately 4 bar)
  • Maximum water temperature: 40°C
  • Power supply: 2 × AA (not included)
  • Maximum irrigation time: 240 min
  • Time format: 12 h / 24 h
  • Protection: IPX4
  • Irrigation delay and battery level indicator: yes
  • Faucet connection with filter: yes

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Features & Settings

Mode
Battery

Mode

Battery

"It is ideal for situations where there is no access to a power outlet." 2. "They also have a 9v transformer and can be connected to electrodes that have a voltage of 9v."
Expandable
No

Expandable

You can use an extension board to increase the number of solenoid valves (stops) in your system for more flexibility.
Rain Sensor Connection
No

Rain Sensor Connection

The sensor connects to a special port of the programmer and functions as a switch, preventing unnecessary water consumption and protecting plants from overwatering.
Permanent Memory
No

Permanent Memory

Ensures that the watering schedule will not be lost even after a power outage. This way, when the power is restored, the programmer continues to operate normally with your settings, without needing to be programmed again from scratch!

Connection & Sockets

with Solenoid Valve
No

with Solenoid Valve

When the irrigation programmer has an electrovane, it means that it can automatically control the flow of water through electronic valves.

Protection & Performance

Maximum Pressure
8.27 bar

Maximum Pressure

The Maximum Pressure refers to the maximum allowable water pressure that an irrigation programmer can handle without causing damage or malfunction. 
Protection Certification
IPX4

Protection Certification

IPX4

IPX4 indicates that the device is protected from water splashes from all directions. IP refers to ingress protection, X means there is no protection against dust, and 4 means that the device can withstand water splashes from any angle without affecting its operation.

Watering Settings

Time Delay
No

Time Delay

The time delay allows for postponing irrigation for a specific period without changing the main program. It is used for temporary interruption due to rain or maintenance, contributing to water conservation and adjusting irrigation to weather conditions.
Manual Watering
Yes

Manual Watering

Manual watering allows the activation of watering immediately, without affecting the scheduled program. It is useful for testing, additional watering during dry periods, or when immediate moisture is needed for the plants.
Weekly Scheduling
No

Weekly Scheduling

Allows the setting of different watering schedules for each day of the week, providing flexibility in adjusting the frequency and duration of irrigation according to the garden's needs.
Hourly Programming
No

Hourly Programming

It is the setting that determines the total watering duration. It shows how long the watering will last each time the programmer is activated.
Cyclic Programming
No

Cyclic Programming

Watering is activated at recurring time intervals, regardless of the time of day. The user sets an interval (e.g., every 3/6/9 hours)

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Bradas WL-3137/1 electronic irrigation controller features:

  • LCD display
  • 4 independent spray programs
  • Automatic and manual operation
  • Irrigation duration adjustment from 1 to 240 minutes
  • Irrigation frequency every 2 or 3 days or on selected days
  • ECO mode that activates irrigation only when the soil is dry
  • Connection for a moisture sensor (not included)

Technical specifications:

  • Model: WL-3137/1
  • Water connection: GW1' - GW3/4'
  • Output: GZ 3/4' + fitting for quick connector
  • Operating pressure: 0.34 - 8.27 bar
  • Flow rate: 38 L/min (at approximately 4 bar)
  • Maximum water temperature: 40°C
  • Power supply: 2 × AA (not included)
  • Maximum irrigation time: 240 min
  • Time format: 12 h / 24 h
  • Protection: IPX4
  • Irrigation delay and battery level indicator: yes
  • Faucet connection with filter: yes

Manufacturer

Manufacturer Details

Warnings & Safety Information

Features & Settings

Mode
Battery

Mode

Battery

"It is ideal for situations where there is no access to a power outlet." 2. "They also have a 9v transformer and can be connected to electrodes that have a voltage of 9v."
Expandable
No

Expandable

You can use an extension board to increase the number of solenoid valves (stops) in your system for more flexibility.
Rain Sensor Connection
No

Rain Sensor Connection

The sensor connects to a special port of the programmer and functions as a switch, preventing unnecessary water consumption and protecting plants from overwatering.
Permanent Memory
No

Permanent Memory

Ensures that the watering schedule will not be lost even after a power outage. This way, when the power is restored, the programmer continues to operate normally with your settings, without needing to be programmed again from scratch!

Connection & Sockets

with Solenoid Valve
No

with Solenoid Valve

When the irrigation programmer has an electrovane, it means that it can automatically control the flow of water through electronic valves.

Protection & Performance

Maximum Pressure
8.27 bar

Maximum Pressure

The Maximum Pressure refers to the maximum allowable water pressure that an irrigation programmer can handle without causing damage or malfunction. 
Protection Certification
IPX4

Protection Certification

IPX4

IPX4 indicates that the device is protected from water splashes from all directions. IP refers to ingress protection, X means there is no protection against dust, and 4 means that the device can withstand water splashes from any angle without affecting its operation.

Watering Settings

Time Delay
No

Time Delay

The time delay allows for postponing irrigation for a specific period without changing the main program. It is used for temporary interruption due to rain or maintenance, contributing to water conservation and adjusting irrigation to weather conditions.
Manual Watering
Yes

Manual Watering

Manual watering allows the activation of watering immediately, without affecting the scheduled program. It is useful for testing, additional watering during dry periods, or when immediate moisture is needed for the plants.
Weekly Scheduling
No

Weekly Scheduling

Allows the setting of different watering schedules for each day of the week, providing flexibility in adjusting the frequency and duration of irrigation according to the garden's needs.
Hourly Programming
No

Hourly Programming

It is the setting that determines the total watering duration. It shows how long the watering will last each time the programmer is activated.
Cyclic Programming
No

Cyclic Programming

Watering is activated at recurring time intervals, regardless of the time of day. The user sets an interval (e.g., every 3/6/9 hours)

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

47,90 €
14,00 €   shipping cost