Anycubic Standard photopolymer resin is designed for LCD and DLP 3D printers that cure using ultraviolet light. It has a low viscosity of 200–230 mPa·s at 25 °C and volumetric shrinkage of 4.5–5.5%, which help improve print accuracy and reduce the risk of warping. Print accuracy reaches ±0.2 mm.

The resin’s fluidity helps remove air bubbles, while its adhesion to the build plate reduces the likelihood of models detaching. Printed models have a smooth surface and uniform color, making them suitable for painting and further post-processing. The formulation has a low odor.

• Resin type: Standard photopolymer
• Color: Gray
• Weight: 1 kg
• Compatibility: LCD and DLP 3D printers, especially Anycubic devices
• Wavelength: 365–405 nm
• Viscosity: 200–230 mPa·s at 25 °C
• Density: 1.13 g/cm³
• Hardness: 84–86 HD
• Tensile strength: 40–50 MPa
• Elongation at break: 12–16%
• Flexural modulus: 50–60 MPa
• Flexural strength: 1400–1600 MPa
• Young’s modulus: 1600–1800 MPa
• Izod impact strength: 103 J/m
• Volumetric shrinkage: 4.5–5.5%
• Printing temperature: 20–50 °C
• Recommended ambient temperature: 20–40 °C
• First-layer curing time: 20–40 s
• Standard layer exposure time: 2–3.6 s
• Cleaning agent: 95% IPA
• Cleaning time: At least 3 minutes
• UV curing wavelength: 405 nm
• Curing temperature: 18–30 °C
• UV radiation intensity: 25,000–30,000 μW/cm²
• Curing time: 3 minutes
• Shelf life: 18 months