Safety Masks

Filtering Half Mask X100v/x110v Ffp1 Nr D Valve T-9910 Z-17v

Work Mask Disposable Filtering Half Mask X 100 V FFP1 NR D

Certifications and regulations: PN-EN 149+A1:2010 CE 1437, Certificate: WE/S/1824/2011

Purpose: The X 100 V FFP1 NR D work mask is designed...

Work Mask Disposable Filtering Half Mask X 100 V FFP1 NR D

Certifications and regulations: PN-EN 149+A1:2010 CE 1437, Certificate: WE/S/1824/2011

Purpose: The X 100 V FFP1 NR D work mask is designed to protect the respiratory system from aerosols of solid particles, water-based aerosols (dust, smoke), and aerosols with dispersed liquid phase (mists), where...

See Description & Specifications See Description & Specifications

Top specs

  • Filter Type FFP1
The product is not available for shipping to the selected country.

Description & Specifications

Work Mask Disposable Filtering Half Mask X 100 V FFP1 NR D

Certifications and regulations: PN-EN 149+A1:2010 CE 1437, Certificate: WE/S/1824/2011

Purpose: The X 100 V FFP1 NR D work mask is designed to protect the respiratory system from aerosols of solid particles, water-based aerosols (dust, smoke), and aerosols with dispersed liquid phase (mists), where the occupational exposure limit (OEL) is ≤ 2 mg/m³, provided that the concentration of the dispersed phase does not exceed 4 times the OEL.

Examples of use:

  • Agriculture and food industry
  • Non-toxic dust
  • Use in quarries
  • Cement factories
  • Wood industry during softwood (coniferous) processing

Contraindications: This mask does not supply oxygen and does not protect in conditions with reduced oxygen (below 19%). It should not be used in confined spaces, especially without ventilation, such as pipes, shafts, tanks, etc. The mask does not protect against gases, vapors, or mists of substances harmful to health or life. Do not use if the category, concentration, and properties of harmful substances are unknown. Do not use during firefighting. The mask does not provide a proper seal if worn on a shaved or bearded face.

Usage parameters of the X 100 V mask:

  • Category (according to PN-EN 149+A1:2010): FFP1
  • Penetration of sodium chloride aerosol or oil mist through the filter: 20%
  • Total inward leakage: 22%
  • Initial inhalation resistance at a flow of 95 l/min: 210 Pa
  • Initial exhalation resistance at a flow of 160 l/min: 300 Pa

Features: The X 100 V FFP1 NR D work mask consists of:

  • Multilayer polypropylene filter
  • Nose clip for shaping around the nose
  • Head straps made of elastic braided threads
  • Plastic exhalation valve
  • Nose seal made of polyurethane foam

The mask is designed to allow easy breathing throughout work. Thanks to its anatomical shape, the nose clip, and the foam lining underneath, the mask easily adapts to most face shapes to ensure the necessary seal.

Manufacturer

OEM
Filter Type
FFP1
Activated Carbon
No
with Net
No
Pieces
1 pcs

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.