Skroutz.mt

Bemko Wired 360° Infrared Motion Sensor with 20m Range
Motion Sensors

Bemko Wired 360° Infrared Motion Sensor with 20m Range

The wired Bemko B50-SES07WH infrared motion sensor activates connected devices when it detects movement within its coverage area. Designed for indoor wall or ceiling installation, its rotating housing...

The wired Bemko B50-SES07WH infrared motion sensor activates connected devices when it detects movement within its coverage area. Designed for indoor wall or ceiling installation, its rotating housing allows the detection field to be adjusted along both the vertical and horizontal axes.

The light sensitivity can be adjusted from 3 to 2,000 lux, and the...

See full description See full description

Top specs

  • Login

    Wired

    It connects to the installation system via cable.

  • Detection Type

    Infrared

    Detects motion by sensing changes in infrared radiation (heat) emitted by humans or animals.

  • Range

    The range refers to the maximum distance in meters within which it can detect motion.

  • Detection Angle

    The width of the area that a sensor can cover to detect motion. The more degrees, the larger the coverage field.

  • Protection Certification

    IP20

    Suitable only for indoor use in a dry environment. Provides protection against the ingress of objects larger than 12 mm.
  • See all

Learn more about invoicing
Review the product
Product report

Description

Description

The wired Bemko B50-SES07WH infrared motion sensor activates connected devices when it detects movement within its coverage area. Designed for indoor wall or ceiling installation, its rotating housing allows the detection field to be adjusted along both the vertical and horizontal axes.

The light sensitivity can be adjusted from 3 to 2,000 lux, and the operating time can also be set. The maximum detection range is 20 m at temperatures below 24 °C.

  • Detection type: Infrared (PIR)
  • Connection: Wired
  • Supply voltage: 230 V/50 Hz
  • Detection angle: 360°
  • Range: Up to 20 m at temperatures below 24 °C
  • Maximum load: 2,000 W for light sources, 2,000 W for resistive loads and 1,000 W for inductive loads
  • Light sensitivity adjustment: 3–2,000 lux
  • Operating time adjustment: Yes
  • Detection field adjustment: Along the vertical and horizontal axes by rotating the housing
  • Protection rating: IP20
  • Installation: Indoors, on a wall or ceiling

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Specifications

Detection Type
Infrared

Detection Type

Infrared

Detects motion by sensing changes in infrared radiation (heat) emitted by humans or animals.
Detection Angle
360 °

Detection Angle

The width of the area that a sensor can cover to detect motion. The more degrees, the larger the coverage field.
Protection Certification
IP20

Protection Certification

IP20

Suitable only for indoor use in a dry environment. Provides protection against the ingress of objects larger than 12 mm.
Scope
20 m

Scope

The range refers to the maximum distance in meters within which it can detect motion.
Connector
Wired

Connector

Wired

It connects to the installation system via cable.
Battery
No

Battery

Powered by battery.

Additional Features

Antimasking
No

Antimasking

Function that detects any malicious interference, covering or blocking of the lens and automatically activates the alarm.
Tamper
No

Tamper

Refers to protection against attempts to tamper with the device. For example, if someone tries to open the sensor's casing or remove it from its position, the sensor will send an alarm signal.
Curtain
No

Curtain

With a narrow detection angle that allows monitoring of a specific area (windows, doors, narrow passages) and prevents false alarms from surrounding movement.
Recessed
No
PET
No

PET

Motion sensors with this technology are designed to "ignore" the movement of small animals, such as dogs and cats, thus preventing false alarms.
Built-in Camera
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The wired Bemko B50-SES07WH infrared motion sensor activates connected devices when it detects movement within its coverage area. Designed for indoor wall or ceiling installation, its rotating housing allows the detection field to be adjusted along both the vertical and horizontal axes.

The light sensitivity can be adjusted from 3 to 2,000 lux, and the operating time can also be set. The maximum detection range is 20 m at temperatures below 24 °C.

  • Detection type: Infrared (PIR)
  • Connection: Wired
  • Supply voltage: 230 V/50 Hz
  • Detection angle: 360°
  • Range: Up to 20 m at temperatures below 24 °C
  • Maximum load: 2,000 W for light sources, 2,000 W for resistive loads and 1,000 W for inductive loads
  • Light sensitivity adjustment: 3–2,000 lux
  • Operating time adjustment: Yes
  • Detection field adjustment: Along the vertical and horizontal axes by rotating the housing
  • Protection rating: IP20
  • Installation: Indoors, on a wall or ceiling

Manufacturer

Manufacturer Details

Warnings & Safety Information

Specifications

Detection Type
Infrared

Detection Type

Infrared

Detects motion by sensing changes in infrared radiation (heat) emitted by humans or animals.
Detection Angle
360 °

Detection Angle

The width of the area that a sensor can cover to detect motion. The more degrees, the larger the coverage field.
Protection Certification
IP20

Protection Certification

IP20

Suitable only for indoor use in a dry environment. Provides protection against the ingress of objects larger than 12 mm.
Scope
20 m

Scope

The range refers to the maximum distance in meters within which it can detect motion.
Connector
Wired

Connector

Wired

It connects to the installation system via cable.
Battery
No

Battery

Powered by battery.

Additional Features

Antimasking
No

Antimasking

Function that detects any malicious interference, covering or blocking of the lens and automatically activates the alarm.
Tamper
No

Tamper

Refers to protection against attempts to tamper with the device. For example, if someone tries to open the sensor's casing or remove it from its position, the sensor will send an alarm signal.
Curtain
No

Curtain

With a narrow detection angle that allows monitoring of a specific area (windows, doors, narrow passages) and prevents false alarms from surrounding movement.
Recessed
No
PET
No

PET

Motion sensors with this technology are designed to "ignore" the movement of small animals, such as dogs and cats, thus preventing false alarms.
Built-in Camera
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

28,90 €
14,00 €   shipping cost