Skroutz.mt

Montis Mechanical Faucet Irrigation Programmer
Irrigation Programmers

Montis Mechanical Faucet Irrigation Programmer

The mechanical timer Montis MT112 allows control of the operating time of connected electrical devices for up to 24 hours, with a minimum programming step of 15 minutes. Adjustment is made manually...

The mechanical timer Montis MT112 allows control of the operating time of connected electrical devices for up to 24 hours, with a minimum programming step of 15 minutes. Adjustment is made manually via the corresponding pins and automatic mode selection. It features a red indicator light and continuous operation mode. It is suitable for indoor use and has...

See full description See full description

Top specs

  • Protection Certification IP20

  • Hourly

    It is the setting that determines the total watering duration. It shows how long the watering will last each time the programmer is activated.
  • See all

Learn more about invoicing
Review the product
Product report

Description

Description

The mechanical timer Montis MT112 allows control of the operating time of connected electrical devices for up to 24 hours, with a minimum programming step of 15 minutes. Adjustment is made manually via the corresponding pins and automatic mode selection. It features a red indicator light and continuous operation mode. It is suitable for indoor use and has grounding, a maximum load of 3680W, and a maximum current of 16A.

  • Model: MT112
  • Intended use: indoor use
  • Maximum programming time: 24 hours
  • Minimum programming step: 15 minutes
  • Grounding: YES
  • Maximum load: 3680W
  • Maximum current: 16A
  • Programming type: manual (via the corresponding pins)
  • Operating modes: automatic, continuous
  • Protection rating: IP20

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Features & Settings

Mode
Mechanical
Expandable
No

Expandable

You can use an extension board to increase the number of solenoid valves (stops) in your system for more flexibility.
Rain Sensor Connection
No

Rain Sensor Connection

The sensor connects to a special port of the programmer and functions as a switch, preventing unnecessary water consumption and protecting plants from overwatering.
Permanent Memory
No

Permanent Memory

Ensures that the watering schedule will not be lost even after a power outage. This way, when the power is restored, the programmer continues to operate normally with your settings, without needing to be programmed again from scratch!

Connection & Sockets

with Solenoid Valve
No

with Solenoid Valve

When the irrigation programmer has an electrovane, it means that it can automatically control the flow of water through electronic valves.

Protection & Performance

Protection Certification
IP20

Watering Settings

Time Delay
No

Time Delay

The time delay allows for postponing irrigation for a specific period without changing the main program. It is used for temporary interruption due to rain or maintenance, contributing to water conservation and adjusting irrigation to weather conditions.
Manual Watering
No

Manual Watering

Manual watering allows the activation of watering immediately, without affecting the scheduled program. It is useful for testing, additional watering during dry periods, or when immediate moisture is needed for the plants.
Weekly Scheduling
No

Weekly Scheduling

Allows the setting of different watering schedules for each day of the week, providing flexibility in adjusting the frequency and duration of irrigation according to the garden's needs.
Hourly Programming
Yes

Hourly Programming

It is the setting that determines the total watering duration. It shows how long the watering will last each time the programmer is activated.
Cyclic Programming
No

Cyclic Programming

Watering is activated at recurring time intervals, regardless of the time of day. The user sets an interval (e.g., every 3/6/9 hours)

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The mechanical timer Montis MT112 allows control of the operating time of connected electrical devices for up to 24 hours, with a minimum programming step of 15 minutes. Adjustment is made manually via the corresponding pins and automatic mode selection. It features a red indicator light and continuous operation mode. It is suitable for indoor use and has grounding, a maximum load of 3680W, and a maximum current of 16A.

  • Model: MT112
  • Intended use: indoor use
  • Maximum programming time: 24 hours
  • Minimum programming step: 15 minutes
  • Grounding: YES
  • Maximum load: 3680W
  • Maximum current: 16A
  • Programming type: manual (via the corresponding pins)
  • Operating modes: automatic, continuous
  • Protection rating: IP20

Manufacturer

Manufacturer Details

Warnings & Safety Information

Features & Settings

Mode
Mechanical
Expandable
No

Expandable

You can use an extension board to increase the number of solenoid valves (stops) in your system for more flexibility.
Rain Sensor Connection
No

Rain Sensor Connection

The sensor connects to a special port of the programmer and functions as a switch, preventing unnecessary water consumption and protecting plants from overwatering.
Permanent Memory
No

Permanent Memory

Ensures that the watering schedule will not be lost even after a power outage. This way, when the power is restored, the programmer continues to operate normally with your settings, without needing to be programmed again from scratch!

Connection & Sockets

with Solenoid Valve
No

with Solenoid Valve

When the irrigation programmer has an electrovane, it means that it can automatically control the flow of water through electronic valves.

Protection & Performance

Protection Certification
IP20

Watering Settings

Time Delay
No

Time Delay

The time delay allows for postponing irrigation for a specific period without changing the main program. It is used for temporary interruption due to rain or maintenance, contributing to water conservation and adjusting irrigation to weather conditions.
Manual Watering
No

Manual Watering

Manual watering allows the activation of watering immediately, without affecting the scheduled program. It is useful for testing, additional watering during dry periods, or when immediate moisture is needed for the plants.
Weekly Scheduling
No

Weekly Scheduling

Allows the setting of different watering schedules for each day of the week, providing flexibility in adjusting the frequency and duration of irrigation according to the garden's needs.
Hourly Programming
Yes

Hourly Programming

It is the setting that determines the total watering duration. It shows how long the watering will last each time the programmer is activated.
Cyclic Programming
No

Cyclic Programming

Watering is activated at recurring time intervals, regardless of the time of day. The user sets an interval (e.g., every 3/6/9 hours)

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

12,90 €
14,00 €   shipping cost