USB Network Adapters

Sonoff USB Network Adapter with Wireless Wi-Fi Connection

The Sonoff Dongle Plus CC2674P10 USB network adapter connects to a computer or other host device and functions as a Zigbee 3.0 or Thread radio adapter. Depending on the installed firmware, it can be...

The Sonoff Dongle Plus CC2674P10 USB network adapter connects to a computer or other host device and functions as a Zigbee 3.0 or Thread radio adapter. Depending on the installed firmware, it can be used as a Zigbee coordinator or router, or as an OpenThread RCP. It features a Texas Instruments CC2674P10 chip with a 48 MHz Arm Cortex-M33 processor, 1024 kB...

See full description See full description
33 59 €
Delivery by Thu, 26 Nov
14,00 €   shipping cost
Sent from Greece
From Top Electronics 4.9 (38)

Learn more about invoicing

Description

Description

The Sonoff Dongle Plus CC2674P10 USB network adapter connects to a computer or other host device and functions as a Zigbee 3.0 or Thread radio adapter. Depending on the installed firmware, it can be used as a Zigbee coordinator or router, or as an OpenThread RCP. It features a Texas Instruments CC2674P10 chip with a 48 MHz Arm Cortex-M33 processor, 1024 kB of flash memory and 256 kB of RAM.

With the factory-installed Zigbee coordinator firmware, it supports creating and managing a Zigbee network through systems such as Home Assistant with ZHA or Zigbee2MQTT. With OpenThread RCP firmware, it can function as a radio interface for an OpenThread Border Router service and Matter over Thread devices. It includes a 1 m USB extension cable and has an aluminum alloy enclosure.

  • Connection: Wireless
  • Protocols: Zigbee 3.0, Thread
  • Zigbee roles: Coordinator, router
  • Thread role: OpenThread RCP
  • Compatibility: Home Assistant, Zigbee2MQTT, ZHA, OpenThread Border Router, eWeLink CUBE OS, ioBroker, Domoticz, openHAB
  • Chip: Texas Instruments CC2674P10
  • Processor: Arm Cortex-M33, 48 MHz
  • Flash memory: 1024 kB
  • RAM: 256 kB
  • USB-to-serial converter: CP2102N
  • Radio frequency: 2.4 GHz
  • Radio standard: IEEE 802.15.4
  • Maximum transmit power: +20 dBm
  • Antenna: Built-in, with a nominal gain of 3 dBi
  • Communication range: Up to 200 m under line-of-sight conditions
  • Power supply: 5 V DC, 500 mA via USB
  • Standby power consumption: 40 mW
  • Operating temperature: -10 °C to +60 °C
  • Operating humidity: 0–95% relative humidity
  • Supported operating systems: Windows, Ubuntu, Raspberry Pi OS / Raspbian, Docker environments
  • Enclosure material: Aluminum alloy
  • USB extension cable length: 1 m
  • Dimensions: 18 × 10.5 × 214 mm

Manufacturer

See full description

Specifications

Specifications

Dimensions

Network Standards
-

Connectivity

Connection
Wireless
Antenna
Integrated
USB-C
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Sonoff Dongle Plus CC2674P10 USB network adapter connects to a computer or other host device and functions as a Zigbee 3.0 or Thread radio adapter. Depending on the installed firmware, it can be used as a Zigbee coordinator or router, or as an OpenThread RCP. It features a Texas Instruments CC2674P10 chip with a 48 MHz Arm Cortex-M33 processor, 1024 kB of flash memory and 256 kB of RAM.

With the factory-installed Zigbee coordinator firmware, it supports creating and managing a Zigbee network through systems such as Home Assistant with ZHA or Zigbee2MQTT. With OpenThread RCP firmware, it can function as a radio interface for an OpenThread Border Router service and Matter over Thread devices. It includes a 1 m USB extension cable and has an aluminum alloy enclosure.

  • Connection: Wireless
  • Protocols: Zigbee 3.0, Thread
  • Zigbee roles: Coordinator, router
  • Thread role: OpenThread RCP
  • Compatibility: Home Assistant, Zigbee2MQTT, ZHA, OpenThread Border Router, eWeLink CUBE OS, ioBroker, Domoticz, openHAB
  • Chip: Texas Instruments CC2674P10
  • Processor: Arm Cortex-M33, 48 MHz
  • Flash memory: 1024 kB
  • RAM: 256 kB
  • USB-to-serial converter: CP2102N
  • Radio frequency: 2.4 GHz
  • Radio standard: IEEE 802.15.4
  • Maximum transmit power: +20 dBm
  • Antenna: Built-in, with a nominal gain of 3 dBi
  • Communication range: Up to 200 m under line-of-sight conditions
  • Power supply: 5 V DC, 500 mA via USB
  • Standby power consumption: 40 mW
  • Operating temperature: -10 °C to +60 °C
  • Operating humidity: 0–95% relative humidity
  • Supported operating systems: Windows, Ubuntu, Raspberry Pi OS / Raspbian, Docker environments
  • Enclosure material: Aluminum alloy
  • USB extension cable length: 1 m
  • Dimensions: 18 × 10.5 × 214 mm

Manufacturer

Dimensions

Network Standards
-

Connectivity

Connection
Wireless
Antenna
Integrated
USB-C
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

33,59 €
14,00 €   shipping cost