The F&F TOM-150-5 single-phase current transformer proportionally converts high current levels to lower values for measurement. It has a split core: the conductor carrying the current to be measured passes through the main opening, and the secondary winding terminals connect to the measuring circuit.
For safe use, the secondary circuit must be connected with a conductor of at least 2.5 mm² cross-section, and terminal S2 must be grounded. The secondary circuit must not be disconnected while in operation.
- Type: Current transformer
- Display: Analogue
- Installation: On a rail or conductor
- Number of phases: Single-phase
- Transformation ratio Ip/Is: 150/5
- Rated secondary current Is: 5 A
- Maximum current: 5 A
- Power: 1.5 VA
- Accuracy class: 1
- Frequency: 50/60 Hz
- Maximum operating voltage: 0.66 kV AC
- Insulation withstand voltage: 2 kV/1 min
- Safety factor: FS ≤ 2
- S1/S2 connection: With a conductor
- Secondary circuit conductor cross-section: At least 2.5 mm²
- Operating temperature: -15 to 45°C
- Degree of protection: IP20
- Standard: IEC 60044-1
- Dimensions: Width 45 mm, height 67 mm, depth 35 mm, A 23 mm, B 24 mm, C Ø 22 mm
- Display Type
- Analog
- Installation Type
- Rail
- Number of Phases
- Single-phase
- Maximum Current
- 5 A
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.