The FF Professional three-phase DIN-rail kilowatt-hour meter measures electricity consumption up to 400 A. It connects via Wi-Fi and allows readings to be monitored remotely through an app or web browser. It supports bidirectional and four-quadrant measurement.
The three included current transformers are installed around the conductors without having to disconnect them. The device is installed on a DIN rail in an electrical panel.
- Type: Kilowatt-hour meter
- Installation type: DIN rail
- Number of phases: 3
- Measurement directions: 2
- Measurement quadrants: 4
- Connectivity: Wi-Fi, 2.4 GHz
- Remote monitoring: Via app or web browser
- Maximum current: 400 A
- Current transformers: 3, with a primary current of 400 A and a secondary current of 30 mA
- Supply voltage: 3× 230/400 V AC (-25%÷15%)
- Frequency: 50÷60 Hz
- Meter accuracy: 1%
- Transformer accuracy: 0.5%
- Cable diameter: Up to 34 mm
- Meter constant: 1000 imp/kWh
- Operating humidity, non-condensing: Up to 90%
- Radio signal power (IEEE 802.11n): Up to 20 dBm
- Receiver sensitivity: -98 dBm
- Connection cross-section: 2.5 mm² for stranded cable, 4.0 mm² for solid conductor
- Tightening torque: 0.5 Nm
- Power consumption: Up to 2 W
- Operating temperature: -20÷50 °C
- Dimensions: 90 x 35 x 85 mm
- Installation width: 2 modules of 35 mm
- Protection rating: IP20
- Package contents: 3 current transformers
Specifications
- Type
- Kilowatt meter
- Installation Type
- Rail
- Number of Phases
- Three-phase
- Maximum Current
- 400 A
Smart Features
- Connectivity
- Wi-Fi
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.